Cub Cadet EW-7416APN manual Wlan MAC

Band	Please select the wireless band you wish to use. By
	selecting different band setting, you’ll be able to
	allow or deny the wireless client of a certain band.
	If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz
	(G), only wireless clients using the wireless band
	you select (802.11b, 802.11 Draft-N, or 802.11g)
	will be able to connect to this access point.
	If you select 2.4GHz (B+G), then only wireless
	clients using 802.11b and 802.11g band will be
	able to connect to this access point.
	If you want to allow 802.11b, 802.11g, and 802.11
	Draft-N clients to connect to this access point,
	select 2.4GHz (B+G+N).
Main ESSID	Please input the ESSID (the name used to identify
	this wireless access point) here. You can input up
	to 32 alphanumerical characters. PLEASE NOTE
	THAT ESSID IS CASE SENSITIVE.
Site Survey	When you use this access point as a wireless
	station for Ethernet network device to have
	wireless capability, you have to associate it with a
	working access point. Click ‘Select Site Survey’
	button, then a “Wireless Site Survey Table” will
	pop up. It will list all available access points near
	by. You can select one access point in the table and
	it will join wireless LAN through this access point.
	Please go to Section 2-4-2-1 for more information
	about the ‘Wireless Site Survey Table’.
WLAN MAC	For some applications, you may need to designate
	a specific MAC address for the access point.
	Please enter the MAC address here. If you are
	connecting the access point to a computer, you can
	simply press ‘Clone Mac address’ button to fill the
	MAC address field with the MAC address of your
	computer.
	27