| If you select 2.4GHz (B+G), then only wireless |
| clients using 802.11b and 802.11g band will be |
| able to connect to this access point. |
| If you want to allow 802.11b, 802.11g, and 802.11 |
| |
| select 2.4GHz (B+G+N). |
MAIN ESSID | Please input the ESSID (the name used to identify |
| this wireless access point) here. You can input up |
| to 32 alphanumerical characters. PLEASE NOTE |
| THAT ESSID IS CASE SENSITIVE. |
Multiple ESSID | The access point supports multiple SSID function; |
| up to four SSIDs can be set. If you want to |
| configure additional SSIDs, please click this |
| button. For detailed descriptions of the function, |
| please refer to Section |
Channel Number | Please select a channel number you wish to use. |
| The channel number must be same with another |
| wireless access point you wish to connect |
Associated Clients | Click ‘Show Active Clients’ button and a new |
| popup window will appear which contains the |
| information about all wireless clients connected to |
| this access point. You can click ‘Refresh’ button in |
| popup window to keep information |
MAC address | Please input the MAC address of the wireless |
| access point you wish to connect |
Set Security | Click this button to select an encryption mode for |
| this wireless link, a new popup window will |
| appear. Please refer to Section |
| descriptions. |
After you finish with setting, please click ‘Apply’, and the following message will be displayed:
35
