displayed here. If you don’t enable security

 

function of the access point before WPS is

 

activated, the access point will auto set the security

 

to WPA (AES) and generate a set of passphrase key

 

for WPS connection.

 

Passphrase Key: Displays the WPA passphrase

 

here, all characters will be replaced by asterisk for

 

security reason. If encryption is not set on this

 

access point, nothing will be displayed here.

Config Mode

There are ‘Registrar’ and ‘Enrollee’ modes for the

 

WPS connection. When ‘Registrar’ is enabled, the

 

wireless clients will follow the access point’s

 

wireless settings for WPS connection. When

 

‘Enrolle’ mode is enabled, the access point will

 

follow the wireless settings of wireless client for

 

WPS connection.

Start PBC

Click ‘Start PBC’ to start Push-Button style WPS

 

setup procedure. This access point will wait for

 

WPS requests from wireless clients for 2 minutes.

 

The ‘WLAN’ LED on the access point will be

 

steady on for 2 minutes when this access point is

 

waiting for incoming WPS request.

Start PIN

Please input the PIN code of the wireless client

 

you via client wish to connect, and click ‘Start PIN’

 

button. The ‘WLAN’ LED on the access point will

 

be steady on when this access point is waiting for

 

incoming WPS request.

NOTE: When you’re using PBC type WPS setup, you must press ‘PBC’ button (hardware or software) of wireless client within 120 seconds; if you didn’t press PBC button of wireless client within this time period, please press ‘PBC’ button (hardware or software) of this access point again.

41

Page 48
Image 48
Cub Cadet EW-7416APN manual Displayed here. If you don’t enable security