4.Insert the depth stake into the depth gage bracket assembly as seen in Fig. 3–7.

Set-Up

Gas & Oil Fill-Up

Service the Engine with gasoline and oil as instructed in the seperate Engine Operator’s Manual packed with your tiller. Read the instructions carefully.

WARNING! Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel the machine indoors or while the engine is hot or running.

Cotter

Clevis Pin

Pin

Figure 3-7

5.Secure the pin with the clip removed earlier. The depth stake can be placed at various positions. For setup purposes it is suggested that the depth stake be assembled with the stake just above or level with the ground surface. For further instructions on the Depth Stake refer to the Maintenance & Adjustments Section of this manual.

Adjustments

Wheels

The tiller is shipped with the wheels adjusted so that the machine sits level. The wheels need to be adjusted to meet your tilling needs before operation. This adjustment is made by removing the clevis pin from the wheel yoke and raising the wheels to the desired height. See Fig. 3-8.

Wheel Yoke

Clevis

 

Pin

Cotter

Pin

Depth

Stake

Figure 3-8

Section 2— Assembly & Set-Up