SAFETY PRECAUTIONS

2.Spectators, children, fellow workers and animals must be warned to stay back 50 feet (15m) while the trimmer is in use. Stop the engine and cutting head immediately if you are approached.

3.People working in the area near you should wear the same protective equipment as the operator.

PREPARATION FOR THE USE OF THE TRIMMER:

1.Never modify the trimmer in any way. Only attachments supplied by Cub Cadet Commercial or expressly approved by Cub Cadet Commer- cial for use with the specific Cub Cadet Commer- cial trimmer models are authorized. Although certain unauthorized attachments are usable with the Cub Cadet Commercial trimmer, their use may, in fact, be extremely dangerous.

2.When transporting your trimmer in a vehicle, properly secure it to prevent turnover, fuel spillage and damage to the trimmer.

3.Always use the shoulder harness when using rigid blades.

4.Adjust the shoulder harness and hand grips to suit your size before starting work.

5.Always check your trimmer for proper condition and operation before starting, particularly the throttle trigger, throttle trigger interlock, stop switch, cutting head or blade, deflector and harness.

6.The throttle trigger must move freely and always spring back to the idle position. The cutting head must be properly tightened and in safe operating condition. Inspect for loose parts (nuts, screws, etc.).

HANDLING FUEL: The Cub Cadet Commercial trimmer uses an oil-gasoline mixture for fuel.

1.Gasoline is an extremely flammable fuel. If spilled and ignited by a spark or other ignition source, it can cause fire, serious burn injury and property damage. Use extreme caution when handling gasoline or an oil-gasoline fuel mixture.

2.Do not smoke or bring any fire or flame near the

fuel.

3.Fuel your trimmer outdoors or in a well-ventilated area.

4.Select bare ground for fueling and move at least 10 feet (3 m) from the fueling spot before starting the engine.

5.Gasoline vapor pressure may build up inside the gas tank of a two cycle engine depending on the fuel used, the weather conditions, and the venting system of the tank. In order to reduce the risk of personal injury from escaping gas vapor and fumes, remove the fuel filler cap on your trimmer carefully so as to allow any pressure buildup in the tank to release slowly.

6.Never remove the fuel filler cap while the engine is running.

7.Unit vibrations can cause an improperly tightened fuel cap to loosen or come off permitting fuel to spill. In order to reduce the risk of fuel spillage and fire, tighten the fuel cap by hand with as much force as possible.

8.Wipe off any spilled fuel before starting your trimmer.

9.Check for fuel leakage while refueling and during operation. If fuel or oil leakage is found, do not start or run the engine until the leak is fixed and spilled fuel has been wiped away.

10.If fuel spills on your clothing, change your clothing immediately.

CARBON MONOXIDE HAZARDS:

1.If you operate the trimmer in an area that is confined, or even partially enclosed, the air you breathe could contain a dangerous amount of exhaust gas. To keep exhaust gas from building up, provide adequate ventilation.

2.The exhaust gas contains carbon monoxide, a poisonous, colorless and odorless gas. Breath- ing the exhaust gas can cause loss of conscious- ness and may lead to death.

3

Page 3 Page 5
Page 4
Image 4
Cub Cadet ST26, ST23, ST35 manual Preparation for the USE of the Trimmer, Carbon Monoxide Hazards
Page 3 Page 5

ST35, ST23, ST26 specifications

The Cub Cadet ST26, ST23, and ST35 snow blowers are excellent machines designed for efficient snow removal. Built with durability in mind, these models come equipped with robust features and advanced technologies aimed at enhancing performance and ease of use during winter months.

One of the main features of the Cub Cadet ST series is its powerful engines. The ST26 is powered by a 243cc engine, while the ST23 has a slightly smaller engine but still delivers commendable power for residential use. The ST35, on the other hand, boasts a more robust engine that provides superior snow removal capability, ideal for larger driveways or more substantial snowfall. The engines ensure reliable starts, even in cold temperatures, which is essential during winter.

These snow blowers also feature an innovative electric start option, allowing users to start the machine with just the push of a button. This convenience is particularly beneficial on frigid mornings when a traditional pull-start may be less appealing.

Another highlight of the ST series is the Cub Cadet's patented Intuitive Control System. This system allows users to easily adjust the speed, direction, and chute angles with minimal effort. With multiple forward and reverse speeds, users can navigate through varying snow conditions and terrain seamlessly.

The composite poly chute is another great feature, designed to provide enhanced throwing distance and prevent clogging. This innovative chute design helps direct snow exactly where users want it, saving time and effort when clearing driveways and walkways.

Additionally, the ST series snow blowers come with oversized tires that offer enhanced traction, allowing for better stability and maneuverability on slippery surfaces. The machines are also equipped with heated hand grips, ensuring comfort in extremely cold conditions.

Built with a strong, durable frame, these snow blowers are constructed to withstand the rigors of winter use. The reinforced housing provides additional protection against wear and tear, making the ST series reliable over years of heavy use.

In summary, the Cub Cadet ST26, ST23, and ST35 snow blowers present an array of advanced features and technologies. With powerful engines, intuitive controls, and robust construction, they stand out as efficient solutions for snow removal. Whether tackling light snowfalls or heavy winter storms, these machines offer performance and reliability, making them an excellent choice for homeowners seeking to conquer winter weather challenges.
Top Page Image Contents