FUELING INSTRUCTIONS

6.Install the bolt cover (Ref.6).

7.Install the left hand nut (Ref.7) tighten to 18.5 (N • m).

WARNING

Reread the Safety Precautions relating

to “Handling Fuel” on Page 3.

The Cub Cadet Commercial trimmer uses an oil- gasoline mixture as fuel. The engine is certified to operate on unleaded gasoline.

Use regular name-brand unleaded gasoline with a minimum octane number of 89. If the octane number of the regular grade gasoline in your area is lower use premium unleaded fuel. Fuel with a lower octane number may result in preignition (causing “pinging”) which is accompanied by an increase in engine temperature. This, in turn, increases the risk of piston seizure and damage to the engine.

The chemical composition of the fuel is also important. Some fuel additives not only detrimentally affect elastomers (carburetor diaphragms, oil seals, fuel lines etc.), but magnesium castings as well. This could cause running problems or even damage the engine. For this reason it is essential that you use only name- brand fuels!

IMPORTANT:

Do not use any gasoline containing alcohol. Serious engine or fuel system damage will occur.

Use only quality two-stroke, air-cooled engine oil with the classification TC. The mix ratio is 25-30:1.

We recommend Cub Cadet Commercial brand 2- Stroke Engine Oil since it is specially tested for use in all Cub Cadet Commercial two-stroke engines. The mix ratio is 50:1

IMPORTANT:

Do not use BIA or TCW (two-stroke water cooled) mix oils!

Directions for Mixing: (See Chart for Amounts)

1.Put one-half of the gasoline in a safety approved container.

2.Add the proper amount of two-stroke oil and mix thoroughly.

3.Add the remainder of the gasoline and mix thoroughly.

Take care when handling gasoline. Avoid direct contact with the skin and avoid inhaling fuel vapor.

The gasoline container should be kept tightly closed in order to prevent any moisture getting into the mixture.

Only mix sufficient fuel for a few days work, not to exceed 30 days of storage. Store in a safety approved fuel container only.

Fuel Mixes:

Gasoline

Oil (50:1)

Oil (25-30:1)

 

(Cub Cadet

(Other Name-

 

2-Stroke

Brand TC Oils)

 

Engine Oil)

 

 

 

 

Liters

Liters

Liters

(U.S. gal.)

(U.S. fl. oz.)

(U.S. fl. oz.)

 

 

 

1

0.02

0.04-0.033

(1)

(2.6)

(5.12-4.27)

 

 

 

10

0.2

0.4-0.33

(2.5)

(6.4)

(12.8-10.66)

 

 

 

20

0.4

0.8-0.67

(5)

(12.8)

(25.6-21.33)

 

 

 

Dispose of empty two-stroke oil containers at authorized disposal locations only.

CAUTION

The engine used on this trimmer is of a 2-cycle design. The internal moving parts of the engine, f.e., crankshaft bearings, piston pin bearings and piston to cylinder wall contact surfaces, require oil mixed with the gasoline for lubrication. Failure to add oil to the gasoline or failure to mix oil with the gasoline at the appropriate ratio will cause major engine damage which will void your warranty. For your fuel premix, only use Cub Cadet Commercial brand 50:1 2-cycle oil or a quality oil designed for 2-cycle air cooled engines.

12

Page 12 Page 14
Page 13
Image 13
Cub Cadet ST26, ST23, ST35 manual Fueling Instructions, Directions for Mixing See Chart for Amounts
Page 12 Page 14

ST35, ST23, ST26 specifications

The Cub Cadet ST26, ST23, and ST35 snow blowers are excellent machines designed for efficient snow removal. Built with durability in mind, these models come equipped with robust features and advanced technologies aimed at enhancing performance and ease of use during winter months.

One of the main features of the Cub Cadet ST series is its powerful engines. The ST26 is powered by a 243cc engine, while the ST23 has a slightly smaller engine but still delivers commendable power for residential use. The ST35, on the other hand, boasts a more robust engine that provides superior snow removal capability, ideal for larger driveways or more substantial snowfall. The engines ensure reliable starts, even in cold temperatures, which is essential during winter.

These snow blowers also feature an innovative electric start option, allowing users to start the machine with just the push of a button. This convenience is particularly beneficial on frigid mornings when a traditional pull-start may be less appealing.

Another highlight of the ST series is the Cub Cadet's patented Intuitive Control System. This system allows users to easily adjust the speed, direction, and chute angles with minimal effort. With multiple forward and reverse speeds, users can navigate through varying snow conditions and terrain seamlessly.

The composite poly chute is another great feature, designed to provide enhanced throwing distance and prevent clogging. This innovative chute design helps direct snow exactly where users want it, saving time and effort when clearing driveways and walkways.

Additionally, the ST series snow blowers come with oversized tires that offer enhanced traction, allowing for better stability and maneuverability on slippery surfaces. The machines are also equipped with heated hand grips, ensuring comfort in extremely cold conditions.

Built with a strong, durable frame, these snow blowers are constructed to withstand the rigors of winter use. The reinforced housing provides additional protection against wear and tear, making the ST series reliable over years of heavy use.

In summary, the Cub Cadet ST26, ST23, and ST35 snow blowers present an array of advanced features and technologies. With powerful engines, intuitive controls, and robust construction, they stand out as efficient solutions for snow removal. Whether tackling light snowfalls or heavy winter storms, these machines offer performance and reliability, making them an excellent choice for homeowners seeking to conquer winter weather challenges.
Top Page Image Contents