Panasonic PT 47WXD64 Hdmi High Definition Multimedia Interface input connection, About Hdmi

HDMI (High Definition Multimedia Interface) input connection

About HDMI

HDMI is the first all digital consumer electronics A/V interface that supports several uncompressed standard, enhanced and high definition video format as well as existing multi-channel audio format. One jack supports both

video and audio information. The HDMI/HDCP1 input can

be connected to an EIA/CEA 8612 compliant consumer electronic device, such as a set top box or DVD player equipped with a HDMI or DVI output connection. By inputting a High-bandwidth Digital Content Protection (HDCP) high definition picture source to the HDMI terminal of this PTV, high definition pictures can be displayed on the screen in their digital form. The HDMI input terminal is not intended to be used with personal computers. This PTV is compatible with 1080i, 480p and 480i formats. Select the output of the connecting to device to match that of the PTV.

Notes:

1.HDMI/HDCP = High Definition Multimedia Interface / High-Bandwidth Digital Copy Protection.

2.EIA/CEA-861 Profiles compliance covers profiles for transmission of uncompressed digital video including high bandwidth digital content protection.

Compatible formats

This PTV is compatible with following formats. Please set the connecting device to following format.

Video signal

Format	No of dots	Vertical scanning
		frequency (Hz)
1080i	1920 x 1080i	59.94 / 60
540p (480p)	720 x 480p	59.94 / 60
	640 x 480p	59.94 / 60
540p (480i)	720 x 480i	59.94 / 60

Audio signal

When digital audio is included in the HDMI connection, the compatible sampling frequencies are 48 KHz / 44.1Khz / 32 Khz.

OPTIONAL EQUIPMENT CONNECTIONS

Connection diagram

Follow the diagram below to connect the PTV to a set top box or a DVD player.

ANT A
Cable In
Incoming
Cable
ANT B		TERMINALS ON BACK OF PROJECTION TELEVISION
		VIDEO
CableCARDTM	HDMI	Y
INTERFACE				￿	￿
SERVICE	AV IN	PB				S-VIDEO
ONLY		PR						VIDEO	ENGLISH
DIGITAL AUDIO OUT		L			L		HDMI
								L
		R						R
	L	1	2
		AUDIO COMPONENT		INPUT	INPUT	INPUT	PROG	TO AUDIO
		VIDEO INPUT		1	2	3	OUT	AMP
	AUDIO IN
	R
						AUDIO	OUT
CABLES NOT SUPPLIED
						OUT
					R

EXTERNAL DIGITAL

COMPONENT

*The connector on the PTV is HDMI Type A connector.

Procedure

•Connect the HDMI output from the set top box or a DVD player to the HDMI input on the back of the PTV.

•Press TV/VIDEO button on the remote control to select HDMI input. The connector on the PTV is HDMI Type A connector.

•If the external device has DVI output only, use a DVI to HDMI adaptor cable*3 to connect to the HDMI jack on the PTV. Also, connect the Audio Out signal from the external device (set top box or DVD player) to the Audio In*4 jacks below the HDMI input.

•If you cannot display the picture because of your Digital Set Top Box does not have a Digital Out terminal setting, use the Component Video Input (or the S-Video Input or Video Input). In this case, the picture will be displayed as an analog signal.

Notes:

*3. HDMI-DVI conversion cable (TY-SCH03DH) available on Panasonic Website: www.panasonic.com.

*4. Please refer to pages 22 and 23 for Audio setting detail.

9z