Panasonic PT 47WXD64 First Time Setup, Input Setup, Procedure, Auto Scan, Convergence

ENGLISH

FIRST TIME SETUP

First Time Setup

For your convenience, First Time Set up menu will be displayed on screen when the set is turned on for the first time. If needed, follow the menus and procedures displayed on-screen for setting up the features.

Input Setup

To select the configuration of RF input depending on the signal source.

Note: No video will be displayed in this setup mode.

Procedure

•Press VOL to select Cable only, Cable/Antenna or Antenna only.

•Press the OK button to underline your selection.

First time setup	OK
Input Setup	Cable only

Auto Scan

Connect Cable to Antenna (A)

Manual Program

Signal Meter

Change your Input Setup

and press OK

•When the next screen is displayed, press OK button to start the Auto Scan. All available channels with a signal will be programmed into memory.

Auto Scan

This feature allows you to selectively auto scan channels. You can Scan All, Analog only channels or Analog & Digital channels.

Procedure

•Press OK button to start Auto Scan.

First time setup		SELECT
Input Setup	Scan All
Auto Scan	Antenna (A) Analog	MENU	EXIT
		to return
Convergence	Antenna (A) Analog & Digital

Antenna (B) Analog

Antenna (B) Analog & Digital

•After Auto Scan is completed the PTV tunes to the first channel found during auto scan.

Notes:

•If the EXIT button is pressed at anytime during auto scan, the First Time Setup menu will be cancelled and the PTV will tune to analog channel 2 on ANTENNA (A).

•If a CableCARD is present during the First Time Setup and Antenna (A) is set to cable, Antenna (A) will not be scanned due to the CableCARD providing the channel map.

Convergence

This menu lets you set the green CRT alignment and the center convergence. Follow the instructions on-screen to perform convergence. After convergence is performed, press EXIT to return to normal viewing.

First time setup		SELECT	OK
Input Setup
Auto Scan		MENU	EXIT
	Press OK to go to	to return
Convergence
	Convergence setup

6z