MENU OPERATIONS

Set Up

This menu lets you select antenna, program channels, select analog and digital closed caption, Convergence, Auto Power On, Image Shift and Zoom Adjust.

Procedure

Press MENU to display the Main Menu.

• Press CH, CH , VOL or VOL to select the Setup icon.

Press OK button to display the options in the Setup menu.

Program CH

This menu allows you set up the antenna, auto scan all available analog and digital channels, manually add or delete channels and display the signal strength of the digital channels.

ˆInput Setup - Lets you specify Antenna mode (Cable only, Cable/Antenna or Antenna only).

Note: You can connect either a Cable antenna or a terrestrial antenna to Ant A. However, if you have both Cable signal and terrestrial antenna signal, the Cable signal must be connected to the Ant A input on the back of the projection television. Connect the antenna signal to the Ant B input.

Procedure

In Set Up menu, select Program Channel and press OK.

• Press OK to enter sub-menu. Press VOL or VOL to select Cable Only, Cable/Antenna or Antenna Only.

Press OK button to enter your selection. When the next screen will be displayed, press OK button to start the Auto scan. Auto scan must be done when you select the input signal for the first time or whenever you change the antenna configuration.

Program Channel

OK

Input Setup

Cable only

Auto Scan

Connect Cable to Antenna (A)

Manual Program

Signal Meter

Change your Input Setup

and press OK

Program Channel

OK

Input Setup

Cable only

Auto Scan

Connect Cable to Antenna (A)

Manual Program

Signal Meter

Auto scan is needed

press OK to start Auto Scan

Notes:

If Cable Only, Antenna Only or Antenna/Cable is selected and DCM (Digital Cable Module) is not in, the Auto scan will perform Scan All.

If Cable Only is selected and CableCARD is in, Auto scan will be skipped.

If Cable/Antenna is selected and CableCARD is in, Antenna (B) Analog & Digital Auto scan will be performed.

ˆAuto Scan - To automatically Scan All available channels, Antenna (A) Analog, Antenna (A) Analog & Digital, Antenna (B) Analog and Antenna (B) Analog & Digital.

Procedure

Highlight Auto Scan and press OK to enter the sub menu.

• Use CH and CH to select and press OK to start the auto scan. After Auto Scan is completed press MENU to return to the previous screen.

Program Channel

OK

Input Setup

Scan All

Auto Scan

Antenna (A) Analog

Manual Program

Antenna (A) Analog & Digital

 

Antenna (B) Analog

Signal Meter

Antenna (A) Analog & Digital

Press OK to channel scan all available channels

ˆManual Program - To add or delete channels from either channels list (A/B) manually.

Program Channel

 

 

SELECT

OK

Input Setup

RF Input

Antenna (A)

 

 

Auto Scan

Channel Add

 

MENU

EXIT

 

Channel Delete

A: 12

to return

 

Manual Program

 

 

 

 

 

 

Signal Meter

 

 

 

 

ˆSignal Meter - Displays the signal strength of the ATSC digital channel in either Antenna (A) or Antenna (B).

Note: Signal meter feature is not available for analog channels.

Procedure

Highlight Signal Meter and press OK button to enter the sub-menu.

In the RF Input field, select either Antenna (A) or Antenna (B).

• Select the channel number using VOL or VOL buttons.

Press OK button to display the Signal Strength.

Program Channel

Input Setup

RF Input

Antenna (A)

 

Auto Scan

 

RF Channel

3-1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Manual Program

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Signal Meter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Signal Strength: 70%

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Peak:

: 75%

 

 

Note: The color of the signal bar usually indicates the strength of the received signal.

Green - Adequate signal for a good reception.

Yellow - Poor signal strength.

Red - Very poor signal strength.

ENGLISH

27z

Page 29
Image 29
Panasonic PT 47WXD64 operating instructions Set Up, Program CH