SPECIAL FEATURES OF THE HIGH DEFINITION PROJECTION TELEVISION

Special Features of the High Definition Projection Television

Channel and Program Tuning

Channel and Program tuning in digital television is different from current conventional television. In DTV, multiple programs can exist within a single 6MHZ channel. These channels behave as sub-channels within a single channel. When tuning to a digital channel, the HDTV Projection Television will also tune to a program. The HDTV Projection Television will indicate the channel and program using the on-screen Channel Banner display.

Note: In order to select channels properly, Auto Scan must be performed (refer to page 25).

Tuning digital and analog channels

You can tune the digital and analog channels in the following ways:

ˆ Direct tuning (0 - 9 keys) - using the numeric keys on the

Remote control to directly input the Channel number. If

necessary, use the

button to enter the program number of

Channel Banner: Minimized

The minimized Channel Banner will display the antenna input, channel number, and the station identification (if available).

A:15-1

KPBS-HD

Channel Banner: Maximized

Press the RECALL button to display the maximized channel banner. While the channel banner is displayed, you can add the channel to Favorite channel list or delete the channel from the Favorite channel list.

Antenna designation,

Rating

 

Picture mode

PIP/SPLIT CH# or

 

Channel and program #

 

 

indication

Signal Format

Clock

and Station identifier

setting

Input information

ENGLISH

the digital channel.

ˆ Channel Up/Down Tuning (CH or CH buttons) - Tunes to the next or previous available channel or program. The Channel Up/Down tuning depends upon the surfing mode (see pg. 21) you have set in the Channel menu.

ˆRapid Tuning (R-TUNE) - Switches between the last two channels or programs.

A:15-1

KPBS - HD

Add FAV

Add FAV or Del FAV button

TV-G

1080i

 

12:30 pm

 

 

 

HDMI

 

 

 

 

VIVID

 

CC

SAP

 

FULL

 

30

 

 

 

 

 

 

Closed Caption and

Program Aspect

 

Time remaining

 

in Sleep Timer

SAP indication

 

 

 

 

 

Audio Track 1 of 1 (English)

Audio Track of digital channel

Direct Tuning Method

Follow the procedure below to directly enter the channel number using the Remote Control numeric keys.

Procedure

Press the numeric keys on the Remote Control to enter the Channel number. Press OK button.

If tuning a digital channel and your channel contains

more than one program, press the button and enter the program # (1, 2, 3 etc.) using the numeric keys. Press OK button. The following is an example of tuning to channel 15-1.

Direct Tuning Example

 

 

 

 

 

 

 

 

Step

Action

Channel Banner

 

 

Display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

Press 1

1

 

 

 

 

 

 

 

 

 

2

Press 5

15

 

 

 

 

 

 

 

 

 

3

Press

 

 

15-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Press 1

15-1

 

 

 

 

 

 

 

 

 

5

Press OK

15-1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The HDTV Projection Television will tune to channel 15-1.

Add Fav / Del Fav feature

This feature lets you add channels to Favorite channel list or delete channels from Favorite channel list.

Procedure

Tune the desired the channel to be added or deleted.

Press the RECALL button to display the Channel Banner.

Press the OK button to execute your choice.

Emergency Alert System (EAS) Forced Tuning

If a CableCARD™ module is installed, the cable MSO (multiple system owner/operator) may provide an Emergency Alert System message. These messages are intended to alert the general public of important local or national emergency situations. In the event of receipt of one of these messages, the HDTV Projection Television shall immediately tune to the channel as directed by the EAS message. If the channel has blocked using the parental control, the parental blocking has priority over the forced tune.

13z

Page 15
Image 15
Panasonic PT 47WXD64 operating instructions Channel and Program Tuning