Panasonic PT 47WXD64 operating instructions Troubleshooting Chart

ENGLISH

TROUBLESHOOTING CHART

Troubleshooting Chart

Before calling for assistance, determine the symptoms and follow suggested solutions.

AUDIO		VIDEO	Solutions
			Adjust Antenna Location and Connection.
Noisy Audio
		Snowy Video
			Adjust Antenna Location and Connection.
			Check Antenna Lead-in Wire.
Normal Audio	Multiple Image /		Adjust Convergence (refer to pages 28 and 29).
	Color shift in picture
			Move television from Electrical Appliances, Lights,
Noisy Audio			Vehicles and Medical Equipment.
		Interference
			Increase Volume.
			Check Mute.
No Audio			Check television SPEAKERS on/off. (refer to pages 22 and 23)
		Normal Video	Change Channel.
			Set TV or Cable Mode Properly.
Noisy Audio			Check Antenna Cables.
	No Video with Snow

		Check Power Cord is Plugged into Active Outlet.
	?	Adjust Brightness and Audio Controls.
		Change Channel.
		Check Cable Connections.
No Audio		Program the Remote Control Again.
	No Video / No PIP	Check Second Video Source Operation.
		Poor ATSC signal strength. Re-orient the ATSC antenna.

			Re-orient the ATSC antenna.
			Check signal meter (refer to page 27). If the signal is weak, add a signal
Audio Break up	Digitalization of image		booster to boost the signal strength.
	Image freeze up
			This is a normal condition to prevent image burn-in. This feature can be
	Picture shifts slightly (horizontally)		turned off. However, turning off this feature may result in image retention on
			screen. (refer pg. 28)
Normal Audio	when turned on, changing channels or
	within a duration of two (2) hours of
		viewing.
			Adjust Color Settings.
			Change Channel.
Normal Audio		No Color

34z