Panasonic PT 47WXD64 Optional Equipment Connections, VCR Connection, CableCARD Connection

OPTIONAL EQUIPMENT CONNECTIONS

Optional Equipment Connections

Note: The remote control must be programmed with supplied codes to operate the optional equipment.

VCR Connection

Follow this diagram when connecting your television to a VCR only.

ANT A

Cable In

ANT B TERMINALS ON BACK OF PROJECTION TELEVISION

Digital TV - Set-Top Box (DTV-STB) or DVD Connection

This television is capable of receiving 1080i, 480p, and 480i DTV signals when connected to a DTV tuner set-top-box (STB) or a DVD player. In order to view DTV programming, the STB must be connected to the component video inputs (Y,PB,PR) of the PTV. A DTV signal must be available in your area. Select the output of the STB to either 1080i or 480p.

This television also utilizes a progressive scan doubler, which

ENGLISH

		VIDEO
CableCARDTM	HDMI	Y		￿	￿
INTERFACE		PB				S-VIDEO
SERVICE		AV IN
ONLY		PR						VIDEO
		L L						L
		R R	2					R
	L	1
		AUDIO COMPONENT		INPUT	INPUT	INPUT	PROG	TO AUDIO
		VIDEO INPUT		1	2	3	OUT	AMP
	AUDIO IN
DIGITAL AUDIO OUT	R		CABLES NOT SUPPLIED

VCR

VIDEO OUT

L AUDIO OUT R

de-interlaces the NTSC signal and progressively scans the image. This allows you to sit close to the TV and not see the thin black horizontal lines (venetian blind effect) associated with interlaced TV pictures.

Use this diagram to connect the DTV-STB or DVD player to the back of your projection television.

TERMINALS ON BACK OF PROJECTION TELEVISION

ANT A

Cable In

Procedure

•Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR.

•Begin the video.

CableCARD™ Connection

TERMINALS ON BACK OF DTV-STB OR DVD PLAYER

	DIGITAL TV OUTPUT
R-	Y	PB	PR
	MAIN
AUDIO-L	VIDEO
	R-AUDIO-L - VIDEO S-VIDEO

NTSC OUTPUT

ANT B

		VIDEO
CableCARDTM	HDMI	Y
				￿	￿
INTERFACE		PB				S-VIDEO
SERVICE	AV IN
ONLY		PR						VIDEO
		L L						L
		R R	2					R
	L	1
		AUDIO COMPONENT		INPUT	INPUT	INPUT	PROG	TO AUDIO
		VIDEO INPUT		1	2	3	OUT	AMP

AUDIO IN

This module allows you to tune digital and high definition

DIGITAL AUDIO OUT

R

CABLES NOT SUPPLIED

cable channels through the cable antenna. Consult your Cable company on the availability of this module.

Note: A Digital Cable Subscription is required. (refer to pg. 29)

Procedure

•Connect the Cable antenna to ANT A/Cable In input on the back of the PTV.

•Insert the CableCARD module (upper side facing left) into the CableCARD slot on the back of the PTV.

Notes:

•Left side is the upper side of the DCM cards.

•Do not insert a PCMCIA card into the CableCARD slot.

•Choose Cable mode for Antenna (A) in Input Setup.

•Follow the instructions on screen.

	ANT A
	Cable In
Incoming	ANT B				TERMINALS ON BACK OF PROJECTION TELEVISION
cable
signal					VIDEO
	CableCARDTM	HDMI			Y
	INTERFACE						￿	￿
					PB
				A/V IN					S-VIDEO
	SERVICE
	ONLY										VIDEO
					PR
	￿ I
	NSERT
		TH			L						L
		IS	END
	CableCARD			TM	R						R
			L		1	2
					AUDIO COMPONENT		INPUT	INPUT	INPUT	PROG	TO AUDIO
			AUDIO IN		VIDEO INPUT		1	2	3	OUT	AMP
	DIGITAL AUDIO OUT		R			Left side (upper side)

of card

Note: If you experience keyboard or remote control function hang-up when using CableCARD module, unplug the PTV and plug it back on and try the controls again. If this condition still exists, please call Panasonic Customer Call Center for further instructions.

Note: There are two set of three video iacks, Y, PB, and PR. Separate component color inputs provide luminance and color separation. Use the L (left) and R (right) audio inputs.

Front Control Panel

The front control panel can be used to access menus and switch video mode when the remote control is not available.

The ON/OFF indicator LED (red) will be lit when set is on.

Video 4 location for PT-47WXD64

ON/OFF Indicator LED

CHANNEL TV/VIDEO

S-VIDEO VIDEO 4 L - AUDIO - R

POWER VOLUME OK MENU

			Press this button to
POWER ON/OFF	SD Slot	PC Slot
			eject card from PC
			slot.

A second VCR, Camcorder, a video disc player, video game equipment or DSS equipment can also be connected to the video inputs. See the optional equipment manual for details.

Procedure

•Connect equipment to front Audio/Video input jacks.

•Press TV/VIDEO button to select VIDEO 4 input mode.

•Operate optional equipment as instructed in equipment manual.

8z