Manuals / JVC / Computer Equipment / Projector

JVC Model DLA-HX1E Connecting to Various Devices, connector, Separated cable sold separately

Models: Model DLA-HX1E

1 62

Download 62 pages 48.25 Kb

Page 22

Desktop type (DOS/V, etc.)

Connecting to Various Devices

Connecting to Computers

•Thoroughly read the manuals that come with the computer used.

•Prepare cables for connecting the devices.

Desktop type (DOS/V, etc.)

Desktop type (DOS/V, PC-9800 etc.)

•When the [PC2] input terminal is used, “PC2(BNC)” must be selected from the “Options” menu. (☞ page 39)

•When connecting an audio output terminal such as a computer sound source to the projector, connect to the [AUDIO IN] terminal using the separately available audio cable.

•When connecting to PC-9800 Series computers, a separately available conver- sion adapter is necessary. Please confirm the monitor connector type before use.

Personal Computer connector cable (sold separately)

To monitor

connector	Separated cable (sold separately)
connector
	To [PC2]
		To [PC1]	To [DVI]
	R PR/CR G Y B PB/CB H/CS	V	DVI
		PC1	PC3
	PC2	PC1

		SCREEN	REMOTE RS-232C OUT	RS-232C IN	Y/C VIDEO
	Conversion	TRIGGER AUDIO IN	CONTROL		VIDEO IN
Desktop type	Conversion
Desktop type	adapter for MAC	Right side of projector
(Macintosh)	adapter for MAC	Right side of projector
	(sold separately)

To monitor connector

Notebook Type

To monitor connector

❈There are some notebook type computers that do not allow the computer’ s LCD to work if an external display device is connected. With such computers, the LCD display and external display output need to be switched.

Desktop type

22

Image 22

JVC Model DLA-HX1E manual Connecting to Various Devices, Desktop type DOS/V, etc Desktop type DOS/V, PC-9800 etc, connector

Contents

DLA-HX1U/DLA-HX1E INSTRUCTIONS VOLUME FOCUSPRESETHIDE PROJECTORNOTICE For USA SAFETY PRECAUTIONSIMPORTANT INFORMATION FCC INFORMATION U.S.A. onlySafety Precaution DO NOT allow any unqualified person to install the unitSafety Precaution POWER CONNECTIONPOWER CONNECTION United Kingdom only How To Replace The FuseUsing the screen mode switch function Using the projectorHow to use the SCREEN TRIGGER terminal cable Image flicker due to installation condition or the environ- mentAdjustments and Settings Using Menus ContentsAccessories SAFETY PRECAUTIONS2 AC Power Input Terminal Controls and FeaturesFront Side/ Top Surface/ Left Side 4 Foot Lever for front adjustable footq Connector Panel Controls and FeaturesRear Side/ Right Side/ Bottom Surface y Front Adjustable Foot for adjusting the height and angle1 PC2 Input terminal BNC x Connector PanelControls and Features 4 SCREEN TRIGGER TerminalControls and Features Indicator Display on the Control PanelControl Panel on the Projector STAND BY light on2 OPERATE Indicator Controls and Features1 STAND BY Indicator 9 LAMP IndicatorControls and Features Remote Control Unitt VOLUME button t VOLUME ª / · button Controls and Features1 Remote Control’s signal transmitter i PRESET buttonControls and Features Loading Batteries into the Remote ControlPrecautions for using batteries Battery LifeInstallation Environment Installing the ProjectorPrecautions for Installation Precaution for UsagePrecaution for ceiling-mount Installing the Projector against the ScreenInstalling the Projector Mounting the ProjectorScreen installation Projection Distance and Screen SizeInstalling the Projector Relationship between projection distance and projection screen size Using as a wireless remote control unit Effective Range and Distance of the Remote Control UnitInstalling the Projector Using as a wired Remote Control2 Responds to double density*5, high-vision signals Connecting to Various DevicesSignals that can be input into the projector 3 Response to DTV-format signalsConnecting to Various Devices Allowable input signalsRight side of projector Connecting to DevicesConnecting to Various Devices ConnectionDesktop type DOS/V, etc Desktop type DOS/V, PC-9800 etc Connecting to Various Devicesconnector Separated cable sold separately Control from external device Connecting to Various DevicesConnection for controlling more than one projector Cautions Against Fire and Electric Shock Connecting the Power Cord suppliedConnecting to Various Devices 1. Power On Basic Operation ProceduresBasic Operations 1 Insert the power cord into the wall outlet3. Adjusting the Zoom Ring the screen size Basic Operations Display using the direct buttons 4. Adjusting the Focus Ring Focus To increase the volume press VOLUME ª 0 5. Adjusting the Sound Volume6. Power Off To lower the volume “Digital zoom” Display Frequently used Convenient FunctionsBasic Operations DIGITAL ZOOM HIDE FREEZE KEYSTONE QUICK ALIGN. quick alignmentImages and audio output turn on again Basic OperationsPress the HIDE button once Press the FREEZE button “Vert.keystone” Display Basic OperationsRemoving the Trapezoidal Distortion of the Image “Horiz.Keystone” DisplayBasic Operations Using the Quick Alignment functionUsing the Quick Alignment function for automatic adjustments Press the QUICK ALIGN. Quick Alignment buttonWhen video input is selected Adjustments and Settings Using MenusThe Menu Structure Main menuMain menu Adjustments and Settings Using MenusWhen PC input is selected SubmenuMain menu Adjustments and Settings Using MenusWhen no image signal is inputted SubmenuMenu The Menu Operation ButtonsAdjustments and Settings Using Menus button4. Press the cursor buttons / to select an adjustment item The Procedure for Menu OperationAdjustments and Settings Using Menus 5. Press the cursor buttons / to change the setting value3 “Set up” menu Adjustment and Setting Using MenusThe Menu Configuration When Video input is selected4 “Position” menu Adjustments and Settings Using MenusWhen there is no image signal inputted 5 “Aspect ratio” menuq “Options” menu “Page 1” Adjustments and Settings Using Menusp “Capture start” “Page 1”When PC input is selected Adjustments and Settings Using MenusWhen video input is selected When no image signal is inputted1. Project the image onto the screen Setting “Aspect ratio” and “Resize”Setting the “Aspect ratio” 2. Press the MENU buttonThe setting of “Aspect ratio” menu when input terminal is Setting “Aspect ratio” and “Resize”6. Press the MENU button to end when adjustment is com- pleted 5. Select “Zoom” with the cursor buttons / 1. Project the image onto the screen Setting the “Resize”Setting “Aspect ratio” and “Resize” 2. Press the MENU button5. Select “Zoom” with the cursor buttons / Setting “Aspect ratio” and “Resize”6. Press the MENU button to end when adjustment is com- pleted Optimum image2. Press the MENU button Editing and Projecting Logo1. Project the images to be included in your logo 3. Select “Logo” with the cursor buttons / 7~12 7~12Editing and projecting logo 7. Set the menu position as requiredReplacing the Lamp The procedure for lamp replacementAbout lamp replacement The light source lamp and its lamp time4. Insert the new lamp unit until it is fully in Replacing the Lamp3. Remove the lamp unit 5. Close the handle, and tighten the screw1. Insert the power cord into the wall outlet Resetting the lamp timeCaution for reset work To ensure the lamp time has been reset3. Clean the filter Cleaning and Replacing the Filter1. Pull out the power cord from the wall outlet 4. Reinstalling the filterTroubleshooting Troubleshooting Cause Contents What to do when these messages are displayedMessage Message What to do when these messages are displayedCause Contents Press EXIT button to delete the messagePlease follow the procedures below Warning Indication About warning indicators Action to be taken upon warning indicationsSpecifications 67.5 Specifications92.5 Center of lensSignal name SpecificationsSignal name Signal name2. Command Format Specifications1. Communication Specifications 2-1 Command data formatSpecifications 3. External control command tableMemo Printed in Japan PROJECTOR1003-SW-VP