Basic Operations
Display using the direct buttons
The direct buttons enable direct switching and op- eration without having to go through the menu.
Input mode can be selected |
|
| PC 1 |
| ||
by pressing the [PC] button or |
|
|
| |||
|
| PC 2 |
| |||
the [VIDEO] button. |
|
|
| |||
|
| PC 3 |
| |||
| ||||||
|
|
|
|
|
| |
|
|
|
| Y/C | ||
|
|
|
|
| ||
|
|
|
| VIDEO |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Digital zoom x1.2
Vert.keystone
0
Horiz.Keystone
0
When the [DIGITAL ZOOM], [VOLUME],
‘Tele side’
3.
‘Wide side’
‘Near side’
4.
‘Far side’
When “Line display” (☞ page 39) is set
VIDEO to “5sec” : After changing an input , the new selection will appear on the screen for about 5 seconds.
Screen display
To select a computer or other devices connected to [PC1], [PC2] or [PC3]: Press [PC]
PC
PC
Projector: | Remote |
Control panel | control unit |
• Upon pressing the button, the input mode changes as follows.
[PC1]: Projects image from [PC1] input terminal on
the right hand side of the projector.
PC1 PC2 PC3 [PC2]: Projects image from [PC2] input terminal on
the right hand side of the projector [PC3]: Projects image from [PC3] input terminal on
the right hand side of the projector.
|
|
| When “Line display” (☞ page 39) is set |
| PC1 |
| to “5sec”: After changing an input, the |
|
|
| new selection will appear on the screen |
|
|
| for about 5 seconds. |
|
|
|
|
Screen display
Notes
•Sound is formed from sound signals connected to the [AUDIO IN] terminal.
•When no image is input to the selected input terminal, the mes- sage “No Input” is displayed on the screen. (☞ page 53)
•When the [PC2] input terminal is used, “PC2(BNC)” must be se- lected from the “Options” item in the main menu. (☞ page 39)
3. Adjusting the Zoom Ring (the screen size)
To enlarge the screen size: Turn the zoom ring towards the ‘Wide side’
To reduce the screen size: Turn the zoom ring towards ‘Tele
side’
4.Adjusting the Focus Ring (Focus)
To focus on nearer points: Turn the focus ring towards the ‘Near side’
To focus on farther points: Turn the focus ring towards the ‘Far side’
26
