Gyration GyroRemote and Mobile RF Keyboard specs

GyroRemote

To Set Up and Synchronize the GyroRemote and the Receiver:

1.Power on your computer and connect the Receiver USB cable into an available USB port on your computer.

2.Follow standard USB device installation screens.

3.Insert 4 AAA batteries into GyroRemote handset.

4.Press and hold the LEARN button on the Receiver for 2 seconds. The STATUS light will blink slowly, indicating that the receiver is in “Learn Mode.”

5.Press the TEACH button on the GyroRemote handset. The status light on the Receiver will blink rapidly for 4 seconds, then will blink slowly. Push the TEACH button on any additional devices (i.e. key- board or 2nd GyroRemote) at this time.

1

Image 3

Gyration GyroRemote and Mobile RF Keyboard user manual To Set Up and Synchronize the GyroRemote and the Receiver

Contents

GyroRemote Mobile RF Keyboard Spec GyroRemote Keyboard RF Receiver Product Specifications GyroRemote To Set Up and Synchronize the GyroRemote and the Receiver GyroTools Software To Change the Channel GyroRemote is Using To Determine Which Channel GyroRemote is Using Using GyroRemote Installing or Replacing the Batteries Powering Off GyroRemote Fine-tuning Cursor Control Gyration Mobile Keyboard To Set Up and Synchronize the Keyboard with the Receiver To Determine Which Channel the Keyboard is Using Powering Off the Keyboard To Change the Channel the Keyboard is Using Key Program Function Support Special Keyboard Media Keys Win Microsoft Stops the loading process Gyration RF Receiver Learn ButtonStatus LED Installing 3 or More Devices Keyboard Status LEDsConflict LED Page Symptom Reason Solution GyroRemote Troubleshooting Tips Keyboard Troubleshooting Tips FCC Statement Regulatory Information Canadian Radio Interference Regulations Contacting Gyration Warranty InformationPage United States, Brazil, Canada, Israel International Radio Compatibility PA00169-001 Rev. C