Gyration GyroRemote and Mobile RF Keyboard Gyration RF Receiver

12

Gyration RF Receiver

Learn Button

Pressing the LEARN button for 2 seconds puts the receiver into “Learn M ode”

allowing you to synchronize one or more devices with the receiver. After

devices have been synchronized, pressing the LEARN button again for 2

seconds takes the receiver out of Learn mode. If the receiver is not manually

taken out of Learn Mode, it will automatically return to N ormal Mode after

five minutes.

Status LED

The Status LED displays useful information about modes of operation and the

connection between receiver and transmitter(s).

TThe Status LED remains off when the receiver is operating in

“Normal Mode” and no devices are transmitting.

Contents

Main Product Specifications Spec GyroRemote Keyboard RF Receiver GyroRemote To Set Up and Synchronize the GyroRemote and the Receiver: GyroTools Software To Determine Which Channel GyroRemote is Using To Change the Channel GyroRemote is Using Using GyroRemote Powering Off GyroRemote Installing or Replacing the Batteries Fine-tuning Cursor Control Gyration Mobile Keyboard To Set Up and Synchronize the Keyboard with the Receiver To Determine Which Channel the Keyboard is Using To Change the Channel the Keyboard is Using Powering Off the Keyboard Special Keyboard Media Keys Special Keyboard Media Keys (Continued) Gyration RF Receiver Learn Button Status LED Keyboard Status LEDs Conflict LED Installing 3 or More Devices Page GyroRemote Troubleshooting Tips Symptom Reason Solution Keyboard Troubleshooting Tips Symptom Reason Solution REGULATORY INFORMATION FCC Statement Canadian Radio Interference Regulations Contacting Gyration Warranty Information Page International Radio Compatibility