To Determine Which Channel GyroRemote is Using
GyroRemote has eight individual channels available to it. To determine which channel a device is currently using:
1.Press and quickly release the CHANNEL button on the GyroRemote handset. Count the number of times the green LED light on the top of the handset flashes. The number of flashes indicates the channel the handset is using.
Note: If GyroRemote’s channel is changed when the computer is powered down or the receiver is not connected, the devices will become unsynchronized. When the system is running, click and release the channel button as described above to initiate a “channel confirm” operation. GyroRemote broadcasts a message across all eight channels that informs the receiver what channel it is currently operating on. The receiver then automatically restores synchronization.
To Change the Channel GyroRemote is Using
When two devices are being used in the same proximity, each device should be set to operate on a unique channel.
To change the channel:
1.Press and hold the CHANNEL button on the GyroRemote handset for 2 seconds. When you release the button, GyroRemote will change to the next channel and the green LED will flash. The number of times the green LED flashes indicates the new channel the handset is using.
If a Teach/Learn sequence has already been performed, it will not be necessary to
Tip: If you are installing three or more devices on a single receiver, see “Installing 3 or More Devices” on page 13.
3
