Manuals / Cisco Systems / Computer Equipment / Network Router

Cisco Systems 1140 specifications Using the Express Security Page

Models: 1140

1 36

Download 36 pages 45.88 Kb

Page 17

Using the Express Security Page

•You cannot configure multiple WEP keys. To configure multiple WEP keys, click Security > Encryption Manager.

•You cannot assign an SSID to a VLAN that is already configured on the access point. To assign an SSID to an existing VLAN, choose Security > SSID Manager.

•You cannot configure combinations of authentication types on the same SSID (such as MAC address authentication and EAP authentication). To configure combinations of authentication types, choose Security > SSID Manager.

Using the Express Security Page

Follow these steps to create an SSID using the Express Security page:

Step 1 Type the SSID in the SSID entry field. The SSID can contain up to 32 alphanumeric characters.

Note These characters are not allowed in the SSID: +, ], /, “, TAB, and trailing SPACE.

Step 2 To broadcast the SSID in the access point beacon, check the Broadcast SSID in Beacon check box.

Note When you broadcast the SSID, devices that do not specify an SSID can associate to the access point. This is a useful option for an SSID used by guests or client devices in public space. If you do not broadcast the SSID, client devices cannot associate to the access point unless their SSID matches this SSID, so only one SSID can be included in the access point beacon.

Step 3 (Optional) Check the Enable VLAN ID check box and enter a VLAN number (1 through 4095) to assign the SSID to a VLAN. You cannot assign an SSID to an existing VLAN.

Step 4 (Optional) Check the Native VLAN check box to mark the VLAN as the native VLAN.

Step 5 Select the security setting for the SSID. The settings are listed in order of their robustness, from No Security to WPA, which is the most secure setting.

a.If you select Static WEP Key, choose the key number and encryption size and enter the encryption key (10 hexadecimal characters for 40-bit keys or 26 hexadecimal characters for 128-bit keys.

b.If you select EAP Authentication or WPA, enter the IP address and shared secret for the authentication server on your network.

c.Your 802.11n security configuration must be either no encryption or WPA2/AES. Any other configuration eliminates the higher data speeds provided by 802.11n.

17

Image 17

Cisco Systems 1140 specifications Using the Express Security Page

Contents

4 Obtaining and Assigning an IP Address 5 Mounting the Access Point 1 About this Guide 2 Safety Instructions 3 Overview6 Configuring Basic Settings 7 Troubleshooting 8 Access Point SpecificationsSAVE THESE INSTRUCTIONS 2 Safety Instructions1 About this Guide 20A. Statement Verifying Shipped Components 3 OverviewKey Ports and Components Performing a Site Survey 4 Obtaining and Assigning an IP AddressStep 1 configure terminal Connecting to the Access Point LocallyEnter global configuration mode Assigning the IP Address to the BVIStep 1 Select Start Programs Accessories Telnet Assigning an IP Address Using the CLIinterface bvi1 ip address ipaddress netmask6 Configuring Basic Settings 5 Mounting the Access PointPage DHCP-IP address is automatically assigned by the network DHCP server Step 5 Configure the settings using the following sections as a guideConfiguring the Radios Default Default Settings on the Express Setup PageSetting Step 5 Click Apply Configuring Security SettingsEnabling the Radio Interfaces Using VLANs Configuring Basic Security SettingsUnderstanding Express Security Settings Express Security Limitations Configuring Security for 802.11nExpress Security Types Using the Express Security Page Checking the Access Point LED 7 TroubleshootingMessage Type Access Point LED Diagnostic MessagesStatus LED Message MeaningAccess Point LED Diagnostic Messages continued Configuring System Power SettingsSystem Power Settings Power SourceSwitch Status Figure 4 Low Power Mode WarningSystem Power Settings continued Finding More Troubleshooting HelpCategory 8 Access Point SpecificationsSpecification 10 Declarations of Conformity and Regulatory Information 9 Obtaining Documentation and Submitting a Service Requestrefer to Channels and Maximum Power Settings for Cisco Aironet Models Tested To Comply With FCC Standards FOR HOME OR OFFICE USEVCCI Statement for Japan Japanese Translation Guidelines for Operating Cisco Aironet Access Points in JapanEnglish Translation 03-6434-6500Industry Canada Statement 371-Power Cable and AC AdapterCanadian Compliance Statement English TranslationEuropean Community, Switzerland, Norway, Iceland, and Liechtenstein Page Page Declaration of Conformity for RF Exposure Administrative Rules for Cisco Aironet Access Points in TaiwanUnited States CanadaChinese Translation English Translation Chinese Translation Operation of Cisco Aironet Access Points in BrazilAccess Point Models Portuguese Translation Regulatory InformationEnglish Translation Figure 5 Brazil Regulatory InformationAsia Pacific Headquarters Americas HeadquartersEurope Headquarters Cisco Systems, Inc