Manuals / Cisco Systems / Computer Equipment / Network Router

Cisco Systems 1140 specifications Configure the settings using the following sections as a guide

Models: 1140

1 36

Page 11

Step 5 Configure the settings using the following sections as a guide.

•Host Name—The host name (or system name) is a name for the access point that identifies it on your network. The system name appears in the titles of the management system pages.

•Configuration Server Protocol—This setting specifies how the access point obtains an IP address.

–DHCP—IP address is automatically assigned by the network DHCP server.

–Static IP—The access point uses a static IP address that you enter in the IP address field.

•IP Address—This setting assigns or changes the access point IP address. If DHCP is enabled, the access point obtains its IP address from your network DHCP server. You can assign a static IP address in this field.

•IP Subnet Mask—The IP subnet mask identifies the subnet on which the access point resides. This subnet is provided by your network administrator. If DHCP is enabled, leave this field blank.

Page 11

Image 11

Cisco Systems 1140 specifications Configure the settings using the following sections as a guide

Contents

8 Access Point Specifications 1 About this Guide 2 Safety Instructions 3 Overview4 Obtaining and Assigning an IP Address 5 Mounting the Access Point 6 Configuring Basic Settings 7 TroubleshootingSAVE THESE INSTRUCTIONS 2 Safety Instructions1 About this Guide 20A. Statement Verifying Shipped Components 3 OverviewKey Ports and Components Performing a Site Survey 4 Obtaining and Assigning an IP AddressAssigning the IP Address to the BVI Connecting to the Access Point LocallyStep 1 configure terminal Enter global configuration modeip address ipaddress netmask Assigning an IP Address Using the CLIStep 1 Select Start Programs Accessories Telnet interface bvi16 Configuring Basic Settings 5 Mounting the Access PointPage DHCP-IP address is automatically assigned by the network DHCP server Step 5 Configure the settings using the following sections as a guideConfiguring the Radios Default Default Settings on the Express Setup PageSetting Step 5 Click Apply Configuring Security SettingsEnabling the Radio Interfaces Using VLANs Configuring Basic Security SettingsUnderstanding Express Security Settings Express Security Limitations Configuring Security for 802.11nExpress Security Types Using the Express Security Page Checking the Access Point LED 7 TroubleshootingMessage Meaning Access Point LED Diagnostic MessagesMessage Type Status LEDAccess Point LED Diagnostic Messages continued Configuring System Power SettingsFigure 4 Low Power Mode Warning Power SourceSystem Power Settings Switch StatusSystem Power Settings continued Finding More Troubleshooting HelpCategory 8 Access Point SpecificationsSpecification 10 Declarations of Conformity and Regulatory Information 9 Obtaining Documentation and Submitting a Service Requestrefer to Channels and Maximum Power Settings for Cisco Aironet Models Tested To Comply With FCC Standards FOR HOME OR OFFICE USEVCCI Statement for Japan 03-6434-6500 Guidelines for Operating Cisco Aironet Access Points in JapanJapanese Translation English TranslationEnglish Translation Statement 371-Power Cable and AC AdapterIndustry Canada Canadian Compliance StatementEuropean Community, Switzerland, Norway, Iceland, and Liechtenstein Page Page Canada Administrative Rules for Cisco Aironet Access Points in TaiwanDeclaration of Conformity for RF Exposure United StatesChinese Translation English Translation Chinese Translation Operation of Cisco Aironet Access Points in BrazilAccess Point Models Figure 5 Brazil Regulatory Information Regulatory InformationPortuguese Translation English TranslationCisco Systems, Inc Americas HeadquartersAsia Pacific Headquarters Europe Headquarters