D.Operator Protection System
1.This machine is equipped with a Roll Over Protective Structure (ROPS) and seat belt.
2.The ROPS and seat belt are integral parts of this machine and should not be tampered with, modified in any manner, or removed.
3.The seat belt must be fastened securely at all times when an operator is on the machine.
4.The ROPS extends above and behind the operator position, and therefore the operator must be aware of potential contact of the ROPS with items such as trees, buildings, doorways, clothes lines, utility wires, etc., that could cause the machine to upset or roll- over....use caution in (or avoid) areas where the ROPS could come in contact with any structures, trees, etc.
5.The ROPS and seat belt add additional mass that elevates the machine’s Center of Gravity (C.G.) which negatively affects the machine’s stability and traction....use extra caution when operating on slopes.
6.Inspect the ROPS and seat belt assemblies on a regular basis for damage and improper operation....replace all components that are damaged or are not functioning properly with authorized replacement parts.
7.Failure to use the seatbelt properly could result in serious injury or death if an acciden- tal overturn occurs. In order for the ROPS to be effective, the seat belt must be securely fastened around the operator at all times when the operator is on the machine. Contact with the ROPS during an overturn could cause serious injury or death.
8.The ROPS will not prevent the machine from upsets or roll overs.
9.Only approved attachments should be used on this machine.
6
