ASSEMBLY INSTRUCTIONS
Assembling the Popcorn Maker
1.Place motor base and all removable parts on a clean, flat surface. Make sure the motor base is unplugged from the power outlet and that all parts have been cleaned and dried thoroughly before assembling.
2.Grasp popping plate by the handles and place on top of motor base. Be sure to line up the notches on the front and back of the popping plate with the
grooves on the front and | Fig. 1 |
back of the motor base |
|
(see figure 1). |
|
3.Gently press down on the handles until each side of the popping plate rests firmly in place. Note: The popping plate is properly positioned if it rests flat on
top of the motor base. The unit will not function unless the popping plate is properly positioned (see figure 2).
4.Grasp the popping bowl by the handles, and place it on the popping plate. Be sure that the handles
on the popping bowl rest comfortably in the grooves on the popping plate (see figure 3). Note: The bowl cap
should never be on top of popping bowl while the unit is in use.
5.Plug the popcorn maker into a 120V outlet. Your popcorn maker is now assembled for use.
OPERATING INSTRUCTIONS
1.Place motor base and all removable parts on a clean, flat surface. Make sure the motor base is unplugged from the power outlet and that all parts have been cleaned and dried thoroughly before assembling.
CAUTION: Do not let water or any other liquid drip into the base or on the heating plate.
2.Grasp popping plate by the handles and place on top of motor base. Be sure to line up the notches on the front and back of the popping plate with the grooves on the front and back of the motor base.
Note: The popping plate is properly posi- tioned if it rests flat on top of the motor base. The unit will not function unless the popping plate is properly positioned.
3.Select the amount of popcorn desired from the chart on page 6.
4.Add the approximate amount of vegetable oil or canola oil to popping plate.
Note: See Tips and Hints on page 6 for recommended measurements. Any form of cooking oil is suitable for use, except olive oil.
5.Measure the amount of kernels using the included measuring cup and add to the popping plate.
Note: See Tips and Hints on page 6 for recommended measurements.
6.Grasp the popping bowl by the handles and place it on to the popping plate. Be sure that the handles on the popping bowl rest comfort- ably in the grooves on the popping plate. Note: The bowl cap should never be on top of popping bowl while the unit is in use.
7.Plug the popcorn maker into a 120V outlet.
8.Flip the power switch to the ON position. The motorized stirring arm will activate, and the cooking process will begin.
9.The cooking process will conclude when little to no popping is heard. Flip the switch to the OFF position and unplug unit from wall outlet.
Note: The unit will remain on until manually switched to the OFF position.
5
