Installing the Water Tray
The purpose of the water tray is to receive the condensation drained from the interior. The collected water will evaporate so there is no need to remove the water manually.
To install the water tray, simply slide it in from the rear of the cellar along the track, which is located beneath the cabinet body.
Wine Cellar Features and Use
Temperature Adjustments/Control
Important note: In order to operate efficiently, thermoelectric products should be in an environment with an ambient temperature of less than 70°F (21°C).
When initially turned on, the LED will show the default setting at 55˚F. Your wine cellar has an electronic temperature control on the front of the unit. You can set the temperature of your wine cellar at any setting from 39˚ to 68˚F. The LED will then display the set temperature.
NOTE: White wine temperature is kept at a lower temperature than red wine.
By pressing the (+) temperature button on the display you can increase the temperature; pressing the
Please note that the actual cabinet temperature in a thermal electric unit is dependent on the
ambient temperature. You may set the cabinet temperature within range but the unit may not reach that temperature.
For this model, when the ambient temperature is 77˚F, the lowest temperature that can be reached is
INTERIOR LIGHT CONTROL
Your wine cellar also has a light for your viewing pleasure. The interior display light option allows you to showcase your personal collection of wines. To activate this feature, press the Light button. This button is located on the control panel (see below). The interior light will remain on permanently until light button is pressed again. Under normal operation it is best for the light to remain off.
5
