Multi-Tech Systems ISIHP-4U, ISIHP-4SD manual NetWare Connect Novell Driver Installation

Software/Driver Installation

NetWare Connect (Novell) Driver Installation

{2S/2U models only}

Multi-Tech Systems provides AIO drivers for the ISIHP-2S/2U, so it can function with Novell compatible asynchronous applications (e.g., NetWare Connect). The AIO driver is simply an NLM (NetWare Loadable Module) that runs on the file server. Drivers must be loaded on the file server where the board is installed. Drivers can be loaded from the file server’s console prompt or incorporated for autoloading in the AUTOEXEC.NCF file.

To install the Multi-Tech AIO driver, copy the file AIOISIX.NLM to the system directory of the file server from a workstation on the network. To copy, you can use the following command:

COPY A:\NOVELL\AIOISIX.NLM F:\SYSTEM

To load the driver, go to the system or PC console (where the ISIHP- 2S/2U is installed) and enter the following at the prompt:

LOAD AIOISIX [port=W] [int=X] [name=Y] [note=Z]

To install the ISIHP scripts, copy aiomdms.mdc to f:\system\aio\directory. Click Yes to overwrite the existing aiomdms.mdc file.

Configuring Ports for NetWare Connect

To set up NetWare Connect ports, enter LOAD NWCCON at the NetWare console prompt. LOAD NWCCON opens the NetWare Connect Configuration Utility. Select the appropriate menu options (modem type, speed, flow control, etc.)

Removing the Driver (Novell)

In Novell, remove file AIOISIX.NLM from the system directory and make the appropriate changes to the Autoexec.ncf file.

MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD 61