Multi-Tech Systems ISIHP-4SD, ISIHP-4U manual ISIHP-4S/4U, Side View

Hardware Installation

Intelligent Serial Interface

Hybrid (ISDN/POTS) Cards

(Side View)

V.110

Daughter Card

ISIHP-2S

V.110

Daughter Card

ISIHP-2U

Modem Card

U.S. Domestic

V.110
Daughter Card	Modem Card

ISIHP-4S/4U

Figure 1-3: ISIHP Cards; Side View (on ISIHP-4SD, right daughter card is not present)

4.To avoid damaging the ISIHP-2S/2U and your PC, make sure your computer and any peripheral equipment connected to it are turned off. The ISIHP-2S/2U can be installed in a Pentium equivalent PCI bus computer.

5.Remove the cover of your computer as instructed in your computer’s documentation.

6.Locate the unused PCI slot you will be using for your ISIHP-2S/2U card and remove the slot cover according to instructions in your computer’s documentation.

7.Install the ISIHP-2S/2U card in the selected expansion slot in the same manner as any other add-on card according to your computer’s documentation.

8.Fasten retaining bracket to computer chassis and replace the cover.

14 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD