Multi-Tech Systems ISIHP-4S manual Switch Configuration, p %A97, N1, !N2, !DN1, !DN2, !EN1, !EN2

Terminal Adapter AT Commands & S-Registers

+++AT<cr>	In-band escape code
<break>AT<cr>	Out-of-band escape code
Switch Configuration, p. 108 %A97	Dialing method
!C0	Switch type
!C6	SPID 1
*!C6	SPID 2
!D3	SAPI-0 data TEI
*!D3	SAPI-0 voice TEI
!L	List DN, SPID, TEI,
Data
	protocol & switch type
>Dn	Embedded Protocol
	Analyzer
!N1, !N2, !DN1, !DN2, !EN1, !EN2	Data DN/MSN
*!N1, *!N2, *!DN1, *!DN2, *!EN1, *!EN2	Modem DN/MSN
!Z=n	Rate adaptation protocol
Serial Port Configuration, p. 114 En	Command mode echo
L	List telephone numbers
L5	List current operating
	parameters
L6	List S-register values
L8	Display low level ISDN
	status
Qn	Status displays
Sr=n	Set S-register
Sr?	Read S-register
Vn	Terse/verbose result
	codes
Xn	Connect messages
Z	Restore parameters to
	current power-up profile
&Cn	DCD (Data Carrier
	Detect) control

106 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD