Multi-Tech Systems ISIHP-4SD manual Wn Store Active Profile, 14082345678 16125551212 14089876543

Terminal Adapter AT Commands & S-Registers

&Wn Store Active Profile

Values: n = 0 or 1

Default: &W1 (Use factory default profile)

Stores your active profile, or configuration, in memory, so you don’t lose your custom settings when you turn off the TA or reset it.

&W0 Stores all current AT command and S- register values in nonvolatile random access memory (NVRAM) and configures the TA so it reads your custom settings in NVRAM when the modem is turned on or when it is reset with the Z command. (The &F reset command continues to read the factory default settings in ROM.)

&W1 Erases your custom settings in NVRAM the next time the TA is turned off or reset, causing the TA to read the factory default settings in ROM whenever it is turned on or reset.

&Zn=x Store Telephone Number Values: n = 0–9; x = dial string Default: n/a

Allows you to store a telephone number in a memory register for faster dialing. To store a number, type &Z, the register number (0–9) where you want to store the number, the = character, and the dialing string you want stored. Then press ENTER. The dialing string can have up to 80 characters. To read a stored number, type AT&Zn? (e.g., AT&Z4?) where n is the number of the register you want to read. To display a list of all numbers stored in memory, type ATL and press RETURN:

014082345678

1 16125551212

2 14089876543

3

4 6313551

5

122 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD