Multi-Tech Systems ISIHP-4U, ISIHP-4SD manual NT1

Hardware Installation

9.Connect the ISIHP-2S/2U to your ISDN telephone wall jack with the provided modular telephone cable.

U Interface S Interface S/T Interface

NT1

Device

ISDN line enters building

ISIHP -2S

Figure 1-4: ISDN Interfaces at Customer Premises

Note: The ISIHP communicates over ISDN lines. If you don’t have a standard modular jack near your computer, you should install one or have one installed by your telephone company. In the US, installation kits and adapters are available wherever telephones are sold.

Note: If S/T-interface ISDN network connection cable is used, the ISDN phone cord should be connected between the ISDN network connection cable and the NT1 device. If the S/T-interface model (ISIHP-2S, -4S, or 4SD) is used, then the S/T-interface must be connected to the S-interface on the NT1 device.

10.Turn on power to the computer. Now you are ready to install software.

MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD 15