Multi-Tech Systems ISIHP-4SD, ISIHP-4U manual Activating Ports in SCO Open Server

Software/Driver Installation

When you have specified the device base name and the printer base name, press Enter to continue.

4.The confirmation screen lists the values you have selected. The following text appears on the screen (default values are shown):

You have chosen the following setup The tty prefix is ttyl.

The printer prefix is prnl.

Number of Multi_View pseudo devices [user-specified number].

If these values are correct, type Y and the installation process will continue. If there is an error in any of the values displayed, type N and the first screen displays. Then re-enter the information for each card.

When you accept the confirmation list (by typing Y), a series of messages displays while the driver is being installed and the kernel rebuilt. After the terminals have been added to the Terminal Control database, and when the display says “Press <Enter> to continue:”, then press ENTER. When Installation complete displays, press ENTER again.

5.Select Host and press ENTER . Remove the diskette from the drive.

6.Select Exit and press ENTER .

7.To reboot the system (required), enter the following commands:

Type shutdown -g0-yand press ENTER

OR

Type init 6 and press ENTER .

Driver installation for the ISIHP card now is complete.

Activating Ports in SCO Open Server 5

SCO Open Server 5 provides a device database that monitors the activity of serial ports through which users can log onto the host. If your ISI ports are used by terminals (e.g., to allow users to log onto your host), you must create an entry in the system’s device database

MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD 65