Multi-Tech Systems ISIHP-4U, ISIHP-4SD manual ConfigMenu Configuration Utility

Software/Driver Installation

18.The first TA now is configured. Click Back to return to the Configuration dialog box and repeat steps 4 through 9 to configure the remaining TA(s). If you install multiple ISIHP cards in the same PC, you must configure two TAs per 2S or 2U card installed or four TAs per 4S or 4U card. For example, if you install four ISIHP-2S/2U cards in one PC, you have to configure eight TAs (two per card).

29.After all TAs are configured, close the ISDN TA Configuration utility.

ConfigMenu Configuration Utility

The ConfigMenu configuration utility can be used as another means of configuring the TA. ConfigMenu is installed in the TAs as part of the firmware.

To use ConfigMenu:

1.Start a data communication program and select the COM port where the TA is connected.

2.In the communication program dialog box, type AT@CONFIG and press ENTER. ConfigMenu’s Main Menu appears (see screen below).

3.To select menu item, type its number and press ENTER. A submenu then appears where you can make selections. At the lowest level, you can change a configuration option by selecting a number or typing a value and pressing ENTER.

58 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD