Multi-Tech Systems ISIHP-4SD, ISIHP-4U manual Addresses and IRQ Codes

Models: ISIHP-4S ISIHP-4SD ISIHP-4U

1 155
Download 155 pages 55.55 Kb
Page 32
Image 32

Software/Driver Installation (Windows NT)

12.After the bindings have been reviewed and stored, the message below appears, click Yes.

After re-booting, the ISI Cards icon appears in the Control Panel.

icon

You are now ready to configure the terminal adapter. See the section,“Configuring the Terminal Adapter,” on page 49.

I/O Addresses and IRQ Codes

Unlike many modem products, the ISIHP has no DIP switch for I/O addresses and no jumper to determine the IRQ code. The input/output address and the interrupt request code (IRQ) for the ISIHP are assigned automatically during driver installation. During any subsequent re-cofiguring of your PC, you may need to know the assigned I/O address and IRQ code. To determine the I/O address and IRQ assigned to the ISIHP:

32

MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD

Page 32
Image 32
Multi-Tech Systems ISIHP-4SD, ISIHP-4U manual Addresses and IRQ Codes