Architectural & Engineering Specifications March 2004

DESCRIPTION

Combination Fan-Forced Heater, Ventilator and Ceiling Light provides comfort, convenience and long-lasting dependability.

Electronically balanced centrifugal blower wheel forces heat evenly throughout the room.

Automatic reset thermal protection.

Expansion-type hanger bars for joists up to 24" o.c.; mounting brackets adjust for up to 34" plaster thickness.

Detachable junction box features three (3) wiring knockouts.

One-piece diecast grille with pebble-texture bezel is available in a choice of three finishes: Polished Brass, Chrome or White Enamel. 8" diameter glass lens extends only 3" from ceiling.

Available as energy efficient fluorescent unit – Model 9093FWH. Uses 26 watt Nema Type CFM26W/GX24D/827 fluorescent lamp. Light output equal to 100 watt incandescent (1,800 lumens). Other units use one (1) standard 100 wall bulb. Purchase bulbs locally.

All units include night light feature – 0ne (1) 7 watt bulb (not included).

Connects to standard 4" round duct.

Wall switch with separate on/off controls for all four functions is included with each unit. Or, may be used with any standard in-line thermostat to control the heat cycle.

Refer to NuTone's catalog for a complete line of accessories to effectively adapt this unit to your construction requirements.

DESIGN FEATURES

Air Delivery:

70 CFM.

Sound Level:

3.5 Sones

Electrical Rating: 120 volts, 1717 watts

Dimensions:

Housing: 1314" diameter x 712" deep.

 

Grille: 1538" diameter x 3" extension

 

from ceiling.

 

Reflector: 7" diameter.

 

Lens: 8" diameter.

Material & Finish:

Housing: Galvanized steel.

 

Grille: Die-cast zinc with Polished

 

Brass, Chrome or White Enamel

 

finish.

 

Reflector: Steel with white enamel

 

finish.

 

Lens: Glass.

Motor:

Ventilator: Thermally protected.

 

Heater: Thermally protected.

Impeller:

Ventilator: (1) Aluminum.

 

Heater: (1) Aluminum.

Heating Element:

Nickel-chrome, open coil 1500w.

Duct Size:

4" round.

Deluxe Heat-A-Ventlite®

MODEL: 9093 SERIES

9093 Series

INSTALLATION

Detailed installation instructions are included with each unit.

ARCHITECT'S SPECIFICATIONS

Heat-A-Ventlite®shall be Model Number (specify) as manufactured by NuTone according to listed specifications.

Specify Model Number:

Model Number

Grille Finish

9093FWH

White Enamel

9093BR

Polished Brass

9093CH

Chrome

9093WH

White Enamel

Page 1
Image 1
NuTone 9093 SERIES specifications Description, Design Features, Installation, Architects Specifications