TANDBERG IP GW 3500 manual Technical specifications, Anti-static precautions, Power requirements

Technical specifications

Technical specifications

Power requirements

Table 2: IP GW ratings

Rating	Value
Nominal voltage	115V to 230V 50/60 Hz
Current rating	2A Maximum
Supply voltage range	100 to 240V 50/60 Hz

Over-current protection

Ensure the supply to this unit is protected by a branch circuit protector rated by a maximum of 20A.

Caution — over-current devices must meet applicable national and local

!electrical safety codes and be approved for the intended application.

Operating environment

The IP GW must only be used within the following environmental conditions:

Table 3: Operating environment

Environment	Temperature	Humidity
Operating environment	0°C to 35°C	10% to 95%
		(non-condensing)
Non-operating environment	-10°C to 60°C	10% to 95%
		(non-condensing)
Optimum operating environment	21°C to 23°C	45% to 50%
		(non condensing)

Anti-static precautions

When servicing or removing components or connections, first attach an anti-static wrist strap to an appropriate earth point.

13