Table of contents |
|
General information | 1 |
About the IP Gateway (IP GW) | 1 |
Package contents | 1 |
Port and LED location | 1 |
LED behavior | 2 |
Connecting the IP GW | 4 |
Before you start | 4 |
Step one: Connect power | 4 |
Step two: Connect to Ethernet Ports A and B | 4 |
Initial configuration | 5 |
Step one: Connect to the console port | 5 |
Step two: Configure Ethernet Port A | 5 |
Step three: Assign an IP address to Port A | 6 |
Step four: Discover the IP address of the IP GW | 6 |
Configuring the IP GW | 7 |
Step one: Log in to the IP GW | 7 |
Step two: Configure Ethernet Port B settings (optional) | 7 |
Step three: Configure the default gateway and routes (optional) | 8 |
Step four: Configure an H.323 gatekeeper or SIP registrar (optional) | 8 |
Step five: Configure the auto attendant menus (optional) | 9 |
Step six: Configure an operator (optional) | 9 |
Step seven: Add endpoints and call groups (optional) | 10 |
Step eight: Configure the dial plan | 10 |
Checking for updates | 11 |
Troubleshooting and technical support information | 12 |
Using the event log to help solve a problem | 12 |
Getting more help | 12 |
Technical specifications | 13 |
13 |
