touch but easily pierced with the tip of a sharp knife. Stand the pieces in the feed tube and apply light pressure to the pusher.

IMPORTANT:

Never try to slice soft cheese like mozzarella or hard cheese like Parmesan. You may damage the slicing disc or the food processor itself. You can successfully shred most cheeses except soft ones. The exception is mozzarella, which shreds well if thoroughly chilled. Hard cheeses like Parmesan shred well only at room temperature. Therefore, only attempt

to shred mozzarella when well chilled, and Parmesan when at room temperature.

TECHNIQUES FOR KNEADING YEAST DOUGH WITH THE POWERPREP® METAL DOUGH BLADE

The Premier11-Cup Food Processor is designed to mix and knead dough in a fraction of the time it takes to do it by hand. You will get perfect results every time if you follow these directions.

NEVER TRY TO PROCESS DOUGH THAT IS TOO STIFF TO KNEAD COMFORTABLY BY HAND.

There are two general types of yeast dough.

Typical bread dough is made with a flour mix that contains at least 50% white

flour. It is uniformly soft, pliable and slightly sticky when properly kneaded. It always cleans the inside of the work bowl completely when properly kneaded.

Typical sweet dough contains a higher propor- tion of sugar, butter and/or eggs than typical bread dough. It is rich and sticky and it does not clean the inside of the work bowl. It requires less kneading after the ingredients are mixed. Although 30 seconds are usually sufficient, 60 to 90 seconds give better results if the machine does not slow down. Except for kneading, described below, the processing procedures and use of the DOUGH button are the same for both types of dough.

Machine capacity:

Recommended maximum amount of flour is 5 cups of all-purpose flour or

2-3/4 cups of whole-grain flour. If a bread dough calls for more than the recom- mended amounts of flour, mix and knead it in equal batches. Do the same for sweet doughs that call for more than 3-1/2 cups

of flour.

Using the right blade:

Use the metal dough blade when the recipe calls for more than 3-1/2 cups

(17-1/2 ounces) (875 ml) of flour. Use the metal chopping blade when a recipe calls for less than

3-1/2 (875 ml) cups of flour.

Because the metal dough blade does not extend to the outside rim of the work bowl, it cannot pick up all the flour when small amounts are processed.

Measuring the flour:

It’s best to weigh it. If you don’t have a scale, or the recipe does not specify weight, measure by the stir, scoop and sweep method. Use a standard, graduated dry measure, not a liquid measuring cup.

With a spoon or fork, stir the flour in its container. Do not measure flour directly out of the bag; it is too packed to get an accurate measure. With the dry measure, scoop up the flour so it overflows. With a spatula or knife, sweep excess flour back into the container so the top of the measure is level.

Do not pack flour into the dry measure.

Proofing the yeast:

The expiration date is marked on the package. To be sure your yeast is active, dissolve it in a small amount of warm liquid (about 1/3 cup [75 ml] for one package of dry yeast). The temperature of liquid used to dissolve and activate yeast must be between 105˚ and 115˚F (40˚C and 46˚C). Yeast cells are not activated at temperatures lower than this and they die when exposed to temperatures higher than 130˚F (54˚C). If the recipe includes a sweetener like sugar or honey, add a teaspoon with the yeast. If no sweetener is called for, add a pinch, or add a pinch of flour. The yeast won’t foam without it. Let the mixture stand until it foams, up to 10 minutes.

14

Page 15
Image 15
Cuisinart DLC-2011WWBN-1, DLC-2011WBN-1 Machine capacity, Using the right blade, Measuring the flour, Proofing the yeast

DLC-2011WWBN-1, DLC-2011WBCN, DLC-2011BKWBN, DLC-2011WBC, DLC-2011BKWB specifications

The Cuisinart DLC-2011 series food processors, including the DLC-2011WBN-1, DLC-2011WB, DLC-2011BKWB, DLC-2011WBC, and DLC-2011BKWBN, are renowned for their innovative technology and practical features that cater to both novice cooks and seasoned chefs.

These food processors are designed to simplify cooking tasks, turning laborious food preparation into a seamless experience. With a powerful 600-watt motor, the DLC-2011 series ensures that even tough ingredients are processed with efficiency. The 11-cup capacity is generous enough for a variety of tasks from chopping vegetables to mixing dough, making it an ideal kitchen companion for meal prep.

One of the standout features of the DLC-2011 series is its easy-to-use control system. The processor comes equipped with a simple pulse control and an on/off switch, allowing for precise processing. The inclusion of a stainless steel chopping/mixing blade, along with a slicing disc and a shredding disc, enhances versatility, providing users with multiple options for their culinary creations.

Safety is a priority in the design of these processors, as they include a locking lid and an auto shut-off feature that ensures safe operation. The wide mouth feed tube accommodates whole fruits and vegetables, eliminating the need for pre-cutting, which saves valuable time in the kitchen.

The DLC-2011 series boasts a sleek aesthetic, available in colors that complement any kitchen decor. The durable construction enhances longevity, while the dishwasher-safe parts (excluding the motor base) promote easy cleaning, making maintenance a breeze.

In terms of technology, Cuisinart employs a reliable and efficient motor system that optimizes performance while minimizing noise. Additionally, the precision-engineered components work in harmony to deliver consistent results with every use.

Users will appreciate the versatility of these food processors, as they can handle a wide range of tasks such as chopping, slicing, grating, mixing, and pureeing. Whether preparing a large family meal or experimenting with new recipes, the Cuisinart DLC-2011 series is designed to enhance culinary creativity and efficiency, making it a must-have tool for any kitchen enthusiast.