IMPORTANT UNPACKING INSTRUCTIONS
This package contains a Cuisinart® Premier™ Series food processor, and the standard parts for it:
PowerPrep® metal dough blade, metal chopping blade, slicing disc, shredding disc, detachable stem for discs, spatula, recipe and instruction books, and
CAUTION:
THE CUTTING TOOLS HAVE VERY SHARP EDGES. To avoid injury when unpacking the parts, please follow these instructions:
1.Place the box on a low table or on the floor next to the kitchen counter or table where you intend to keep the food processor. Be sure the box is right side up.
2.Remove the instruction and recipe book package.
3.Remove the cardboard insert. You will see a rectangular block of plastic foam that holds the processor parts, each fitted into a cavity of the foam.
4.The PowerPrep® metal dough blade (A) and detachable stem for the discs (B) are in cavities on one short side of the foam block. Remove them first.
5.The plastic spatula (C) is on the other short side of the foam block. Remove it next.
6.The Slicing disc (D) is on the edge of one of the long sides of the foam block; the Shredding disc (E) is on the other side. Slide them out of their grooves WITH GREAT CARE; THE BLADES ARE VERY SHARP.
7.Only the workbowl cover (F) and pusher assembly (G) now remain in the foam block. Grasp an edge of the work bowl cover and pull it straight up. The pusher assembly will slide away from the workbowl cover and remain in place. Lift it straight up to remove.
8.Lift out the foam block.
9.Lift out the video from its space in the cardboard frame on one side of the box. Then lift out the cardboard frame.
10.The machine base and workbowl with metal blade are at the bottom of the box. The metal blade is loose in the workbowl. Do not turn over workbowl without first removing metal blade.
11.Remove the base and bowl together
by grasping the plastic bowl at the top with both hands and lifting the bowl straight up. Do not rotate the bowl clockwise on the base. This will cause the bowl to separate from the base.
12.Place the food processor on a counter or table and read the instructions thoroughly before using the machine.
13.Save the shipping cartons and plastic foam blocks. You may want to use them at a later date.
Please watch the enclosed
NOTE: Remember to return your completed warranty card with all information carefully filled out.
WHEN
REMOVING BLADE:
CAREFULLY REMOVE THE METAL BLADE BY GRASPING THE CENTER WHITE HUB AND LIFTING IT STRAIGHT UP. NEVER TOUCH THE BLADES AS THEY ARE RAZOR SHARP.
2
