IMPORTANT UNPACKING INSTRUCTIONS
This package contains a Cuisinart® Food Processor and the standard parts for it:
Stainless steel chopping blade, slicing disc, shredding disc, spatula and instruction/recipe book.
CAUTION:
THE CUTTING TOOLS HAVE VERY SHARP EDGES. To avoid injury when unpacking the parts, please follow these instructions.
1.Place the box on a low table or on the kitchen counter where you plan to keep the food processor. Be sure that the box is right side up.
2.Remove the cardboard panel and the instruction material.
NOTE: Remember to return your warranty card with all information carefully filled out completely.
3.You will see a rectangular block of plastic foam that holds the processor parts, each fitted into a cavity in the foam.
•The plastic spatula (A) is in one long side of the foam block. Remove it first.
•The slicing disc (B) is on one side and the shredding disc (C) on the other.
•Slide them out of their grooves
WITH GREAT CARE; THE BLADES ARE SHARP.
•The work bowl cover (D) and the pusher assembly (E) are in the center of the foam block. Grasp an edge of the work bowl and lift it straight up.
4.Lift out the plastic foam block.
5.The machine base and work bowl with metal blade are at the bottom of the box.
CAREFULLY REMOVE THE METAL BLADE BY GRASPING THE CENTER HUB AND LIFTING IT STRAIGHT UP. NEVER TOUCH THE BLADES, WHICH ARE RAZOR SHARP.
6.Remove the base and bowl together by grasping the plastic bowl at the top with both hands and lifting the bowl straight up.
Do not rotate the bowl clockwise on the base. This will cause the bowl to separate from the base.
7.Place the food processor on a counter or table and read the instructions thoroughly before using the machine.
8.Save the carton that your food processor was packed in, and the carton inserts too. You will find them very useful if you need to repack the processor for moving or other shipment.
NOTE: Remember to return your completed warranty card with all information carefully filled out.
WHEN REMOVING
THE BLADE:
CAREFULLY REMOVE THE METAL BLADE BY GRASPING THE CENTER WHITE HUB AND LIFTING IT STRAIGHT UP. NEVER TOUCH THE BLADES, AS THEY ARE RAZOR SHARP
1
