QUICK SETUP GUIDE: PART 2
5.
Place upper tank onto lower tank and cover with lid. Place assembled tanks on base with vertical groove on upper tank facing the back of the unit.
WATER DISPENSER SETUP
6.
Flip lid open and add cold water to FILL line. Continue adding to the FILL line until upper and lower tanks are completely full. This may take
30 – 40 minutes.
7.
Place a glass under right spigot and press and hold COLD button until water flow is steady. Repeat for ROOM. This may take a couple of minutes per button.
8.
Flip lid open and refill upper tank with cold water to FILL line. Continue adding to the FILL line until upper and lower tanks are completely full.
9.
Peel sticker off filter timer and press and hold START button until “Filtering” is displayed.
Filtering
10.
Refer to Instruction Booklet for Operating Instructions.
