CONNECTIONS & SETUP
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied.
CONNECTIONS & SETUP
EXTERNAL EQUIPMENT CONNECTIONS
1.Connect the AV jacks between TV and external equipment. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).
2.Select AV source with using the SOURCE/ 
button on the remote control.
3.Operate the corresponding external equipment. Refer to external equipment
operating guide.
Camcorder |
PHIL IPS |
Video Game Set |
AV |
In poor signal areas, to get better picture quality, install a signal amplifier to the antenna as shown below.
If signal needs to be split for two TVs, use an antenna signal splitter for connection.
S-VIDEO CONNECTION
When connecting with a S-Video cable
1.Connect the
2.Connect the audio outputs of the DVD to the Audio Input (L/R) jacks on the set.
3.Turn on the DVD player, insert a DVD
4.Select 
button on the remote control.
5.Refer to the DVD player's manual for operating instructions
D V D
16 | 17 |
