6. While another person holds the Console (4) |
near the Upright (3), connect the console wire to |
the Wire Harness (73). Insert the excess wire |
downward into the Upright. |
6
Tip: Avoid pinching the wires during this |
step. Slide the Upright Cover (5) upward to the |
top of the Upright (3). Attach the Console (4) |
and the Upright Cover to the Upright with four |
M4 x 19mm Screws (75). |
Console
Wire
Avoid pinching the Wire Harness (73) during this step
4
73
3
5
75
7.Identify the Right Handlebar (36), which is marked with an “R” sticker. Orient the Right Handlebar as shown; make sure that the hexagonal holes are in the indicated loca- tion.
Insert the Right Handlebar (36) into the Right Upper Body Arm (37). Attach the Right Handlebar with two M8 x 35mm Button Bolts
(67)and two M8 Nylon Locknuts (68). Make sure that the Nylon Locknuts are inside the hexagonal holes.
Repeat this step for the Left Handlebar (22).
7 |
|
22 | 36 |
| |
| 68 |
| Hexagonal |
| Holes |
| 67 |
| 37 |
8
