HANDLING COMPACT DISCS
To remove a disc from its storage case, press down on the centre of the case and lift the disc out, holding it carefully by the edges.
Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris so gently wiping with a soft cloth should remove most particles. Wipe in a straight line from the inside to the outside of the disc. Small dust particles and light stains will have absolutely no effect on reproduction quality.
Never use chemicals such as record sprays, antistatic sprays, benzine, or thinners to clean compact discs. These chemicals can irreparably damage the disc's surface.Discs should be returned to their cases after use. This avoids serious scratches that could cause the Laser pickup to skip.
Do not expose discs to direct sunlight, high humidity, or high temperatures for extended periods. Long exposure to high temperatures can warp the disc.
LOADING DISCS
LOADING AND UNLOADING COMPACT DISCS
Set the FUNCTION Selector to the CD position.
Press the CD Open / Close Button to open the disc compartment.
Once the CD door has opened, remove a disc from its case and place it carefully in one of the indentations in the compartment with the label side facing up. Smaller, 3” discs, may also be used with this CD player.
To load additional CD's press the CD Skip button to rotate the CD tray, upto 3 discs can be placed in the tray at any one time. Smaller 3 inch discs can be used in this unit.
To close the disc compartment press the CD Open / Close Button
The unit will go through a cycle to find the first CD there is in the tray, this may take upto 15 seconds.
The disc compartment may be opened at any time by pressing the CD Open/Close Button.
CAUTION
Do not put anything except a compact disc into the compartment. Foreign objects can damage the mechanism.
Do not force the compartment by hand during the opening and closing operations.
Keep the disc compartment closed when not in use to prevent dirt and dust from entering the mechanism.
- 7 -
