Curtis pmn Playing Discs, Track Skip, Important Information, To Stop a CD Part WAY Through

PLAYING DISCS

Press the CD Open/Close Button to open the disc compartment, and load a CD.

Close the disc compartment, the unit will search for the first tray to contain a CD and the display will show the total playing time of the CD.

Press the CD SKIP Button to select the CD of your choice or select the disc using the direct acceess buttons on the front of the unit.

Press the Play/Pause Button, disc play will begin from the start of the first track.

A particular track can be selected by pressing the & Buttons. If this is done before pressing the Play/Pause Button, disc play will start with the selected track when the Play/Pause Button is pressed.

At the end of the disc, the unit will switch to stop mode

Notes: If the disc is deeply scratched, or too dirty, disc play may not start.

If an improperly centred disc is played, noise can be heard in the mechanism. The use of such discs should be avoided.

IMPORTANT INFORMATION

This compact disc player has built-in error compensation circuits to correct for minor defects in a disc. There are limits, however, to the amount of correction available.

In some cases, the CD player may skip some tracks on a disc during disc play. This problem may be caused by defects (such as scratches) in the disc being played, which are too large for the error compensation circuits to handle. If you encounter this problem, check the CD player's operation as follows, before having the unit serviced.

Play a different disc. If the CD player operates normally, the skipping problem is probably due to a defective disc.

TO STOP A CD PART WAY THROUGH

Press the Stop Button. Disc play will stop, the Play indicator will go off, and the display will show the total number of tracks and the total playing time of the CD.

To temporarily stop disc play (pause mode), press the Play/Pause Button. Disc play will pause at the current play position.

To resume disc play, press the Play/Pause Button again. The Play indicator will be displayed.

TRACK SKIP

TO SKIP TO THE NEXT TRACK ON A DISC

For example, to skip ahead to the beginning of track 5 while track 4 is playing.

	Press the Button once. Disc play will resume at the beginning of track 5.
	The CD player will skip ahead to the next track each time the Button is
	pressed. Repeatedly pressing the Forward Skip Track Button makes the CD player
	skip ahead through the disc track by track. Once the beginning of the last trackis
	reached the CD player will not advance any further.

- 8 -