Operation
Now your CD micro system is installed and ready for use, please refer to the following instructions for correct operation.
AC Power Operation
The CD micro system will be in standby mode, when the AC power supply is connected and switched on.
At the front of the CD micro system, or using the remote control, press POWER, to switch the CD micro system on. The LCD display will light up.
Volume Control
WARNING
Do not turn off the CD micro system when the volume is set at high level. When it is subsequently turned on, a sudden blast of sound may damage your hearing and the external speakers.
The volume level can be adjusted either using the controls on the unit or by the remote control.
On the unit turn the volume control towards the ‘+’ sign to increase the volume and towards the
Note: The volume control on the unit does not fully rotate, you only need to turn the control until it clicks.
To adjust the volume level using the remote control, press the VOLUME +/- buttons.
Press MUTE on the remote control to mute the sound. Press MUTE again to resume sound.
Note: Pressing any of the volume control buttons
will also resume sound.
Headphones
Note: Reduce the volume to a low level before putting on headphones. Adjust volume to a comfortable level.
A headphones socket is provided for private listening. It is located on the front of the unit. see page 2.
A pair of stereo headphones with a 3.5mm stereo plug is required(not included). Insert the stereo plug into the socket for headphone use.
The external speakers are automatically disconnected when headphones are in use.
TONE
Your CD micro system has " BASS/TREBLE” sound effect setting. The setting can be selected by pressing the TONE button on the remote.
a.Press TONE 2 times to Bass mode.
b.Press TONE 3 times to Treble mode.
c.Press Vol Up/Down button to adjust the Bass/Trebel effect.
ESP
To turn ON/OFF the ESP function at stop mode for antishock during MP3 playing.
6
