CD player
Operation
Use the remote control or from the main unit, press CD/MP3, to switch the CD micro system on. The LCD display will light up.
Set the function switch to CD. The display will initially flash zeros then show ‘no dIsc’.
Only use CDs that bear the CD logo.
Loading and Unloading CDs
1.Press the EJECT button to open the CD compartment.
2.Press the EJECT button to close the CD door. The display will show the total number of tracks and the total playing time. The CD door can be opened at any time.
First press either STOP on the remote control or STOP on the unit, then press the EJECT button.
Please Note:
-Do not place foreign objects into the CD compartment, this may damage the mechanism.
-Always keep the CD door shut, to prevent dust or dirt from getting into CD mechanism.
-Never place more than one CD into the CD compartment at any time.
-After CD door is closed, CD information may not appear on the LCD display, this means the CD cannot be read by the CD mechanism. Refer to the ‘Care and maintenance’ section.
2. To pause playback, press the play/ pause
button | . The elapsed time will hold. |
3.To resume playback press play/pause again.
4.To stop playback, press either STOP on the remote control or STOP on the unit.
Intro
Press INTRO button on the remote control to intro play the first 10 sec. of each track of the
Track Selection
Using the remote control: |
| |
1. | Press either the | buttons to select the |
| desired track number. |
|
2. | Press play/pause, | to start playing. |
Using the unit controls:
1.Press either of the SKIP/TUNING buttons to select the desired track number.
2.Press PLAY/PAUSE, to start playing. Track Selection During Play Using the remote control:
1. During play, press either of the | buttons |
to select the desired track |
|
number. The selected track will |
|
automatically start to play. |
|
Using the unit controls: |
|
1.During play, press either of the SKIP/TUNING buttons to select the desired track number. The selected track will automatically start to play.
Playing a CD
On CD micro system, or remote control: |
|
1. Press the play/pause button | . The |
display will show the track number and the elapsed playing time.
9
