Caller ID System Operation
5.When the desired setting is displayed, press and hold the Re/Pa/Save button to save the setting. A long “beep” will sound to confirm the setting has been saved.
6.Continue with programming or press the Dir/Esc button to return to STANDBY mode.
NOTE: The standard and default flash time setting is 600 msec. This is the setting you should use to access standard telephone services such as call waiting. This setting is adjustable to allow for PBX and other special uses.
H. Changing the Pause Time
1.Press the Voice Mail/Menu button to enter the menu.
2.Press the 8 button or press the SCROLL DOWN button 8 time to go to the PAUSE TIME programming option.
3.Press the Flash/Edit button to change the setting. “4” will begin flashing.
4.Press the SCROLL UP or DOWN button or number
delay.
5.When the desired setting is displayed, press and hold the Re/Pa/Save button to save the setting. A long “beep” will sound to confirm the setting has been saved.
6.Continue with programming or press the Dir/Esc button to return to STANDBY mode.
I. Programming One-Touch Voice Mail Dialing
1.Press the Voice Mail/Menu button to enter the menu.
2.Press the 9 button or press the SCROLL DOWN button 9 time to go to the VOICE MAIL programming option.
3.Press the Flash/Edit button to enter the voice mail speed dial number.
4.Press the TELEPHONE KEYPAD 0 to 9 buttons to enter the phone number used to access your voice mail messages (up to 32 digits).
5.When the desired setting is displayed, press and hold the Re/Pa/Save button to save the setting. A long “beep” will sound to confirm the setting has been saved.
6.Continue with programming or press the Dir/Esc button to return to STANDBY mode.
