Curtis TC595 owner manual Adjusting the Contrast, Setting the PBX Number, Changing the Flash Time

Caller ID System Operation

E. Adjusting the Contrast

1.Press the Voice Mail/Menu button to enter the menu.

2.Press the 5 button or press the SCROLL DOWN button 5 time to go to the CONTRAST programming option.

3.Press the Flash/Edit button to change the setting. “4” will begin flashing.

4.Press the SCROLL UP or DOWN button or number 1-8 to select from 1 to 8 levels of contrast.

5.When the desired setting is displayed, press and hold the Re/Pa/Save button to save the setting. A long “beep” will sound to confirm the setting has been saved.

6.Continue with programming or press the Dir/Esc button to return to

STANDBY mode.

F. Setting the PBX Number

1.Press the Voice Mail/Menu button to enter the menu.

2.Press the 6 button or press the SCROLL DOWN button 6 time to go to the PBX NUMBER programming option.

3.Press the Flash/Edit button to change the setting. “OFF” will begin flashing.

4.Press the SCROLL UP or DOWN button or number * and 0-9 to customize the digit to match your PBX system. When not connected to a PBX, the phone will only function normally when set to “OFF.”

5.When the desired setting is displayed, press and hold the Re/Pa/Save button to save the setting. A long “beep” will sound to confirm the setting has been saved.

6.Continue with programming or press the Dir/Esc button to return to STANDBY mode.

G. Changing the Flash Time

1.Press the Voice Mail/Menu button to enter the menu.

2.Press the 7 button or press the SCROLL DOWN button 7 time to go to the FLASH

TIME programming option.

3.Press the Flash/Edit button to change the setting. “600” will begin flashing.

4.Press the SCROLL UP or DOWN button or number 1-9 to select the desired FLASH TIME.