Manuals / Curtis / Communications / Cordless Telephone

Curtis TC595 owner manual Problem Solving, BASE UNIT is plugged into a power source

Models: TC595

1 39

Download 39 pages 61.72 Kb

Page 34

Problem Solving

If after pressing the Talk button, you receive three “beeps” and no dial tone, check the following:

1.BASE UNIT is plugged into a power source.

2.If you had a power failure or had unplugged the BASE UNIT, replace the HANDSET on the BASE UNIT for 2 to 5 seconds to reset the system.

NOTE:

If none of the telephones in the house are working, disconnect one set at a time to verify that none of the phones are causing the problem. If you still have a problem after doing this, and your telephone still does not work, please contact your local phone company.

Can not register the HANDSET, when place HANDSET to BASE UNIT not a long beep heard but the triple beep, check as following:.

1.HANDSET is more than 5.

2.Already has a HANDSET with ID=5, and wish register a new one. In this situation, you should reset the BASE UNIT.

3.reset the BASE UNIT: In standby mode, plug the T/P switch to the “P” position and push and hold the PAGE button on the BASE UNIT 8 -10 seconds, the CHAGRER LED will fast flash 1 second . After reset the BASE UNIT, place the each HANDSET to the BASE UNIT for 2 to 5 second for register(see page 29 for detail).

Image 34

Curtis TC595 owner manual Problem Solving, BASE UNIT is plugged into a power source

Contents

5.8 GHz Cordless Telephone Caller ID with Call Waiting OWNERS MANUALModel TC595 PLEASE READ BEFORE OPERATING THIS EQUIPMENTContents Contents Outgoing CallsSafety Instructions IMPORTANT SAFETY INSTRUCTIONSBattery Safety Safety InstructionsSAVE THESE INSTRUCTIONS HANDSET Controls HANDSET Controls 16. Microphone 6. TONE/PULSE Select Switch BASE UNIT Controls1. POWER-IN CONNECTION JACK 2. TELEPHONE LINE CONNECTION JACK 3. BASE UNIT ANTENNA 4. PAGE Button Press to page the HANDSETSUSE ONLY WITH CLASS 2 POWER SOURCE 9V DC, 300mA for the BASE UNIT Getting StartedConnecting Your Phone 9V DC, 100mA for the CHARGER UNITGetting Started Belt Clip InstallationHANDSET TALK Cordless Telephone OperationCall Timer Display Preparing for UseRedial Feature TALKDIAL? Cordless Telephone OperationHANDSET Volume Control VOLUMEVOLUME Using the Headset FeatureOUT OF AREA Caller ID System OperationPRIVATE Caller ID SystemRING HI Caller ID with Call Waiting“MSG” Message Waiting One-Touch Voice Mail DialingPlacing a Call from the Caller List Caller ListViewing the Caller List Caller ID System OperationDeleting a Single Record Storing Caller ID Records into the DIRECTORY PHONE BOOKDeleting Caller ID Records Deleting All RecordsViewing the DIRECTORY PHONE BOOK Storing Phone NumbersName and Telephone Number DIRECTORY PHONE BOOK Caller ID System OperationSpace Caller ID System OperationTelephone Keypad Characters Caller ID System Operation Placing Calls from the DIRECTORY PHONE BOOKEditing a Stored Number in the DIRECTORY PHONE BOOK UNITCaller ID System Operation Deleting a Stored Number in the DIRECTORY PHONE BOOKDeleting All Stored Number in the DIRECTORY PHONE BOOK ERASE ALL?Caller ID System Operation PREFERRED CALLSBLOCKED CALLS OUTGOING CALLSCaller ID System Operation Function SettingsTELEPHONE Function KEYPAD Caller ID System Operation A. Setting the Ringer LevelB. Changing the Language TELEPHONE Function KEYPADC. Turning the FIRST RING ON or OFF D. Setting the Time and DateCaller ID System Operation G. Changing the Flash Time E. Adjusting the ContrastF. Setting the PBX Number Caller ID System OperationCaller ID System Operation I. Programming One-Touch Voice Mail DialingH. Changing the Pause Time Caller ID System Operation K. Setting the Area CodeJ. Deleting Message Waiting Indication MSG WAITINGTRANSFER Multi-HANDSET System OperationRING HI RING HISecurity System Resetting Security Code and Channel InformationMulti-Channel Access Security SystemChanging the BATTERY PACK Recharging the BATTERY PACKRecharging the BATTERY PACK To Replace the BATTERY PACKReceived signal flutters or fades, check the following Problem SolvingProblem Solving Section Phone does not work, check the followingProblem Solving 1. BASE UNIT is plugged into a power sourceNoise Technical InformationTechnical Information RangeFCC Requirements FCC NOTICEFCC Requirements RINGER EQUIVALENCE NUMBERFCC Requirements U.S.A C.I. Service Dept 181 Cooper Avenue Unit Tonawanda, N.Y 14150Service can be obtained at The AC ADAPTOR must always be plugged into an electrical outlet