Curtis TC595 Getting Started, Connecting Your Phone, 9V DC, 100mA for the CHARGER UNIT

Getting Started

Connecting Your Phone

This section is a reference guide to the basic functions and operations of your cordless telephone. For more detailed descriptions of the operations and features of this telephone, refer to the Contents on page 1.

1.Carefully remove your cordless telephone from its shipping carton. If there is any visible damage, do not attempt to operate this equipment. Return it to the place of purchase.

2.Check to be sure you have all items that come with this cordless telephone system. You should have a HANDSET, BASE UNIT, AC ADAPTOR, BATTERY PACK, TELEPHONE LINE CORD, BELT CLIP and Owner’s Manual.

3.Insert the small plug on the end of the AC ADAPTOR into the POWER-IN CONNECTION JACK at the bottom of the BASE UNIT.

4.Plug the AC ADAPTOR into a 120V AC wall outlet.

USE ONLY WITH CLASS 2 POWER SOURCE 9V DC, 300mA for the BASE UNIT

9V DC, 100mA for the CHARGER UNIT

5.Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK and the other end into the TELEPHONE LINE CONNECTION JACK at the bottom of the BASE UNIT. (If you have an older 4-prong TELEPHONE JACK, you will need an RJ-11C TELEPHONE JACK ADAPTOR. This adaptor is available at the same place you purchased your telephone.)

6.We recommend not placing this unit next to appliances. Doing so may cause interference.

9