Caller ID System Operation

Function Settings

You can change the setting on the HANDSET in the functions menu. Access the functions menu by pressing and holding the Voice Mail/Func button.

There are 11 settings in the functions menu which can be changed. You can scroll through

the function menu in the listed order by pressing the SCROLL DOWN button.

Settings can be accessed by pressing the corresponding TELEPHONE KEYPAD button. To edit

a setting, press the Flash/Edit button, use the SCROLL UP or DOWN

button to toggle

between the setting options, and then press and hold the Re/Pa/Save

button to save the

changes. Press the Voice Mail/Func button to exit the functions menu.

TELEPHONE Function

KEYPAD

1Ring Hi/Low/Off: Changes the volume of the ringer on the HANDSET or turn the ringer OFF.

2Language: Changes the language that appears on the LCD Screen. Choose between English, French, or Spanish.

3First Ring On/Off: Turns the first ring of the phone OFF so that it does not ring until Caller ID information has been displayed. Particularly useful when using the PREFERRED and BLOCKED CALL features or the PRIVATE and UNAVAILABLE ring settings.

4Time Set: Changes the time and date.

5Contrast: Adjusts the brightness of the LCD Screen for optimum viewing.

6PBX Number: Inserts if a “PBX Number” before an outgoing number is dialed. Select the number (0-9) which is required to access an outside line when using a switchboard system, and the phone will auto- matically dial the PBX number and a pause before any speed dial or Caller ID callback number. Factory setting is “OFF.”

7Flash Time: Changes the flash time to accommodate the phone service in your area.

8Pause Time: Changes the number of seconds that a pause lasts when using programmed pauses in your speed dial numbers or after your PBX number.

21

Page 22
Image 22
Curtis TC924 owner manual Function Settings, Keypad