Cordless Telephone Operation
Preparing for Use
Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require recharging of the BATTERY PACK more often.
1.Place the HANDSET on the BASE UNIT for 12 hours.
2.After 12 hours, remove the HANDSET from the BASE UNIT.
Before you can use your cordless telephone, you must charge the HANDSET for 12 hours. Failure to do so will require more frequent charging of the BATTERY PACK.
NOTE: Depending on the frequency of use, once the HANDSET is fully charged, it remains functional for approximately 6 hours of continuous use and approximately 6 days when the HANDSET is off the BASE UNIT in STANDBY mode.
Receiving Calls
1. | When the phone rings, the LCD Screen |
|
| will show “RING.” If you have Caller ID, |
|
| the LCD Screen will show the Caller ID |
|
| information after the first ring. | AM |
2. | With the HANDSET off the BASE UNIT, |
|
| press the Talk button. Start your |
|
| conversation. The Call Timer starts to |
|
| count. |
|
3. | To end your conversation, either press the Talk button or place the HANDSET | |
| on the BASE UNIT. If you place the HANDSET on the BASE UNIT CHARGE | |
| CRADLE, you activate the AUTOMATIC STANDBY feature. | |
NOTE: The Call Timer will start to count once you press the Talk button.
TALK
Minutes
Seconds
0 2 | 0 8 |
Call Timer Display
NOTE: While the 2.4GHz frequency is inherently clearer, we suggest that you do not use this phone within 20 feet of a working microwave. The microwave produces frequencies in this range which may cause interference. This interference is normal for all 2.4 GHz phones and should not be considered a product defect.
10
