Problem Solving

If after pressing the Talk button, you receive three “beeps” and no dial tone, check the following:

1.BASE UNIT is plugged into a power source.

2.If you had a power failure or had unplugged the BASE UNIT, replace the HANDSET on the BASE UNIT for 2 to 5 seconds to reset the system.

NOTE:

If none of the telephones in the house are working, disconnect one set at a time to verify that none of the phones are causing the problem. If you still have a problem after doing this, and your telephone still does not work, please contact your local phone company.

30

Page 31
Image 31
Curtis TC924 owner manual Problem Solving